Frame removal

[Tornado]

Yes , that's right i want to remove my frame from the rest of the bike so i can powder coat it before it rusts to bits. i know what the paint job would cost. The only thing i can think of off the top is i would need exhaust gaskets. I must have missed something else, but what

[DaveS]

i want to remove my frame from the rest of the bike

Isn't there a fatal flaw in the plan there.....
I think you might find it easier if you remove the rest of the bike from the frame. Otherwise you might need a hacksaw and a welder to put it back together again.

[miggy]

He's right, removing all the other items around the frame will leave the frame intact plus its also easier to do. The other way round would be a right bugger.

[Tornado]

Yes it would be nice for some positive advice, where do i buy a hack saw

[DaveS]

I find an angle grinder better.
Although there is the story of when I nearly cut my balls off with one.
I still have a 6 inch scar on my left thigh to prove how close I came.

[Chad]

i want to remove my frame from the rest of the bike

Isn't there a fatal flaw in the plan there.....
I think you might find it easier if you remove the rest of the bike from the frame. Otherwise you might need a hacksaw and a welder to put it back together again.

[Chad]

I find an angle grinder better.
Although there is the story of when I nearly cut my balls off with one.
I still have a 6 inch scar on my left thigh to prove how close I came.

i work with a paddy bike most days and have seen the damage these things can do.
#
mind you though when i read that i curled up and clutched myself in sympathy

[Tornado]

what's a paddy bike???????????????

[Chad]

two stroke petrol engine with a 12inch cutting disk universally known as a paddy motorbike on site

[miggy]

I find an angle grinder better.
Although there is the story of when I nearly cut my balls off with one.
I still have a 6 inch scar on my left thigh to prove how close I came.

C'mon then give us the short version of the story, I'm curious now.