speedo cable routing???? RD04

[zxtrevr]

Was wondering if someone could put up a picture of their speedo cable from the drive up the fork leg and past the mud guard, the one on my bike just doesn't look right there's a hose clip around the fork leg to keep it from rubbing on the brake disc, it broke after a show off wheelie and i don't want to break another.

[ddcristi]

Hello...

I have 2 pics that might help you... Unfortunately they are too big to fit here... So, if you need them e-mail me at ddcristi@yahoo.com and I'll send them to you...

Ride safe, DDC

[Whealie]

Hello...

I have 2 pics that might help you... Unfortunately they are too big to fit here... So, if you need them e-mail me at ddcristi@yahoo.com and I'll send them to you...

Ride safe, DDC

Post them to a free hosting site, such as Flickr and then simply use the photo button to insert them in your post.

[ddcristi]

http://www.motociclism.ro/forum/inde...post&p=1143219

you can find some pics here... the last 3 pics might help...

DDC

[Whealie]

http://www.motociclism.ro/forum/inde...post&p=1143219

you can find some pics here... the last 3 pics might help...

DDC

Nope. Private forum that does not let me in. They need to be hosted on a publicly available website.

[ddcristi]

Hmmm... wheird... it's not a private forum... it's a public bikers forum...

Anyway.. http://ddcristi.fotopic.net/c1498281.html

This should work.. Hopefully in about 15-30 minutes...

DDC

[ddcristi]

The pics that can help:

07_04_08_1916.jpg and 07_04_08_1919.jpg

Save them and zoom in...

Good luck! DDC

[Whealie]

so, open pic, get its location (on a PC right click I think and go to properties and copy the HTML address for its location) it look like this:
http://images1.fotopic.net/?iid=ytpz...800&quality=70
start a post, click on the image button (small yellow square with two little mountains on it) and paste this address into the box, click OK and:


here is other one for you:

[ddcristi]

Hehhehehehe.... OK.. I didn't know that.. Thanks for the tip...

Hope the pics help you...

DDC

[YEN_POWELL]

That cable doesn't look right to me. Shouldn't it go inside the right hand fork (clamped tight with a plastic clamp), then through an oval guide hanging of the rear of the mudguard, then up through the hole in the fairing splash plate?