Cheapest replacement exhaust for RD07 ??

[tedmagnum]

Well... Mines pretty rotten and weighs a ton !!

I'm not bothered about anything as long as its cheap and fruity but still road legal.

[Knobblywobbly]

You could make up your own - I did for my RD04 for less than £40!

I bought an end can on ebay (anything would do - mine was a Carbon Can Co.) and a standard exhaust bend for a car in stainless also from ebay. Added a couple of stainless clamps and job done

[tedmagnum]

Originally Posted by Knobblywobbly

You could make up your own - I did for my RD04 for less than £40!

I bought an end can on ebay (anything would do - mine was a Carbon Can Co.) and a standard exhaust bend for a car in stainless also from ebay. Added a couple of stainless clamps and job done

Any pictures ??

[kitped]

Originally Posted by tedmagnum

Any pictures ??

Here's mine with standard 'car' mid section pipe...

[angelo]

Check out Motad - I post a while back pics etc £80 I think or less - lovely note

[lootch67]

Cheapest replacement is probably a second-hand original pipe - if you can find one that's still in good condition.

[tedmagnum]

i actually bought a standard replacement and downpipes for £30 (bargain eh). Was in good condition for 10 years old too.

It's still an ugly heavy lump though so Im looking for something a little bit nicer.

I just may end up making a pipe to fit an Ebay can..

I cant find ANYONE who sells Motad for the AT. Their website doesnt even list the AT as a covered model

[angelo]

Originally Posted by tedmagnum

i actually bought a standard replacement and downpipes for £30 (bargain eh). Was in good condition for 10 years old too.

It's still an ugly heavy lump though so Im looking for something a little bit nicer.

I just may end up making a pipe to fit an Ebay can..

I cant find ANYONE who sells Motad for the AT. Their website doesnt even list the AT as a covered model

First check out eBay they were selling them off there as discontinued -failing that ring them. They say they are for older ATs but they fit fine - check out my posting elsewhere on site.

[Knobblywobbly]

Originally Posted by tedmagnum

Any pictures ??

Here´s a couple:



The black stain at the botom of the link pipe is the leg of my trousers - note to self: Make a heat guard!



I made the can sit a little lower than standard, and a litle further in, so I could get my panniers even on either side.