Wheel bearing codes rd04 and rd07

[R0vers]

HI ALL,

IVE BEEN READING THIS THREAD AND GOT THE INFO FOR ORDERING REPLACEMENT BEARINGS.

Front wheel left & right - 6203
Rear wheel right - 6203
Rear wheel left - 6303
Sprocket carrier - 6204

Bearings with the suffix "2RS" are rubber sealed both sides.

ARE THESE CODES THE SAME FOR THE RD07(A) AS PER THE RD04? AND DO I NEED TO ORDER SEALED BEARINGS FOR ALL THE BEARINGS?


MANY THANKS

[Whealie]

I am pretty certain they are the same for each bike

[R0vers]

I am pretty certain they are the same for each bike

thanks whealie.....can always rely on you...

any ideas on the dust seals??

[Knobblywobbly]

I put the sealed "2RS" bearings in mine (the ones I took out were also 2RS).

[scarfacehugo]

any ideas on the dust seals??

ALWAYS go for double sealed bearings on wheels. Since you're at it, change the rubber seals on the wheel as well. If your wheel spacers are marked in a way that even new seals wont....seal, have new spacers machined in stainless. When assembling, rub everything with lithium grease (Red waterproof grease) and you should have bearings for another 100K miles.

[Brian Bethell]

HI ALL,

IVE BEEN READING THIS THREAD AND GOT THE INFO FOR ORDERING REPLACEMENT BEARINGS.

Front wheel left & right - 6203
Rear wheel right - 6203
Rear wheel left - 6303
Sprocket carrier - 6204

Bearings with the suffix "2RS" are rubber sealed both sides.

ARE THESE CODES THE SAME FOR THE RD07(A) AS PER THE RD04? AND DO I NEED TO ORDER SEALED BEARINGS FOR ALL THE BEARINGS?


MANY THANKS

Just a point, no need to get bearings from Honda, you can get top quality bearings from a bearing outlet (SKF or Timken) they have then on the shelf so you dont have to order them usually.

[ATrider]

How to change wheel bearings.