Center stand

[Simon]

I was wanting a center stand for my 98 @ but don't have much money. Is there anywhere to get a cheap one?

[robelst]

I was wanting a center stand for my 98 @ but don't have much money. Is there anywhere to get a cheap one?

You could try putting the neighbour's cat under the engine protection shield, provided the feline has got the right height.
A slightly more expensive option would be eBay or a breaker. The trick on eBay is to look for parts "available to the UK / Worldwide" rather than just local UK (which is the default: go to "advanced search"), there is a lot of AT stuff in Germany, for example http://cgi.ebay.co.uk/ws/eBayISAPI.d...984198523&rd=1

My AT hangs together with bits bought on eBay, I probably would have scrapped the poor thing if eBay had not existed.

Good luck!

[Simon]

Thanks, i must remember that trick.

[modrover]

Hello... I didn't want to start another Thread, but I'm looking into just such a thing. My RD03 has the mountings for a center stand, but doesn't actually have stand itself.

Any of you guys know of an RD03 stand for sale? Any ideas on what they cost? Honda USA is in the dark on part numbers for bikes that never came over.

Thank you.

[Phoenix]

Hi Simon
gasp amazment to see a fellow AT rider in Ards.
A possible option re your centre stand, is one from herbie in Ballygowan, got mine there for £20.00. He's a bike scrappie. As for the screen powerbronze are way better than any thing else Ive seen.
Phoenix.

[Simon]

Hi Simon
gasp amazment to see a fellow AT rider in Ards.
A possible option re your centre stand, is one from herbie in Ballygowan, got mine there for £20.00. He's a bike scrappie. As for the screen powerbronze are way better than any thing else Ive seen.
Phoenix.

Do you have a number for Herbie? Do you know where to get a Powerbronze screen from without having to pay about £15 postage?

[Gardy]

ordered one today from http://www.davidsilverspares.co.uk after reading another post on this site

cost about £85 all in

[Dilbert]

Modrover
for your RWB '88 model RD03 the centre stand is part number 50600-MS8-811, THEY COST £100+ in the UK so probably close to $200 in the US, like many others I am considering sourcing a trail bike maintenance stand or modifying a 2 tonne hydraulic trolley jack!

[modrover]

Modrover
for your RWB '88 model RD03 the centre stand is part number 50600-MS8-811, THEY COST £100+ in the UK so probably close to $200 in the US, like many others I am considering sourcing a trail bike maintenance stand or modifying a 2 tonne hydraulic trolley jack!

Thank you for the info!