Hi everyone
Just found this great site and thought i would post some pictures of my 88 dominator that i have converted to a supermoto.
Would be great to get some thoughts from you all.
![]()
Hi everyone
Just found this great site and thought i would post some pictures of my 88 dominator that i have converted to a supermoto.
Would be great to get some thoughts from you all.
![]()
CB-1 wheels?
Front wheel is GS500 and rear is early CBR600
Lookin good. Nothing I don't like about that.![]()
08 TDM900,
98 Dominator,
84 XL600lm,
82 XL500r.
Exhaust ok? The single pipe should be much larger and much emptier than stock...
Lovely wheels though. Looks alot better than spoked sm wheels.
I do plan to change end can but needed something to pass mot so i adapted a standard can.
shuish... Nice Ride Man.... Thats it, ave saw enough, ave been contemplating changing my stock dommie now fur 4 months... yes I do like yours... watch this space........what spacers if any did ye need when fitting the wheels... ??? and did ye have to alter much to get the wheels to fit?? does the drive chain line up ok wi the sprocket on the cbr600 wheel ? mabozzar.
Last edited by afk40; 08-03-10 at 06:10 PM.
Getting wheels to line up was worst job,had to make spacers and mill down front caliper mountings on fork leg to move wheel across enough and had to make a bracket to mount front caliper as disc is much bigger than stock one.
Rear was easier and got chain to line up ok but as cbr sprocket is wider i had to fit a wider front sprocket and a 530 chain from a Gixer 1000.
Nice to see modified bikes
Weird problem here in Spain is that original spec tyre sizes and axle to axle length are on registration doc. If you have non-stock sizes, then your bike ain't legal, will fail its ITV (MOT) and insurance is invalid.... unless you pay for a full engineer's inspection and Single Vehicle Approval at a specialist test centre, with a new reg doc....
That's why 70% of bikes up here in the sierras have no ITV or insurance....... anarchists
As for back sprockets, I've used "Supersprox" before, they'll make any centre section in alloy with your choice of steel teeth, mine was for CBR600 centre with a 520 chainring. Not expensive.
Last edited by El Vencejo; 08-03-10 at 10:19 PM.
shuish.. what year of gs wheel an what year o cbr600 rear did ye use, an up to what year.... john
Bookmarks