Help!! Mounting spots on crash bars

[RickSkye]

Help!! Mounting spots on crash bars.

How do I get some sort of bracket to mount my spots onto the crash bars?

Crash bars are tubular and spots need to mount on the flat.

Rick.

[davsato]

get some decent stainless steel p clips

[Boris]

Watch that where you mount them doesn't in the event of a fall cause them to rotate into the bodywork or radiator thereby negating the effectiveness of the crashbars.

[largewayround]

Hi Rick

You could try something like this,


Motohaus Powersports Limited Fog Light Kits / Auxilliary Light-Mount

[RickSkye]

Watch that where you mount them doesn't in the event of a fall cause them to rotate into the bodywork or radiator thereby negating the effectiveness of the crashbars.

That would be a larf

[RickSkye]

Hi Rick

You could try something like this,


Motohaus Powersports Limited Fog Light Kits / Auxilliary Light-Mount

That a piece of kit and no mistake, do you think it is £20 each or for a pair? I will send them an email.

[GOG 007]

I have a spare pair of new ones, still in the box if you are interested ?

[RickSkye]

I have a spare pair of new ones, still in the box if you are interested ?

Hang on a minute, I am trying to work out the orientation on my bars, not as straight forward as I thought.

[outrunner]

Try a cycle shop, that's where I got my brackets from, you might be surprised at the range of light fittings available for push bikes!


Andy

[SPG]

Hi RickSkye,

I have tried several ways to do this on my KTM Adv and by far the best way so far has been to cut a steel plate to the shape you need and then weld it onto the crash bars. You can then drill through the plate and fit the lights.

I will take a few pics tonight and try and post them over the weekend.

Are you going to the Ace Cafe on the 21st Feb ? I am you could have a look .

Good luck

SPG