running rich

[tramp]

Honda do sell the ends but for a kings ransom, if it was mine i`d remove the plungers from the carb bodies and soak in Acf 50 overnight or WD40 and do the cables too. Then make sure they are free moving and most importantly not badly routed as its always the right hand side that corrodes due to Rain and condensation and also when badly routed when full lock applied it pulls the choke on but dont release .

happy fiddling.

[wheelie]

phoned honda today they want £33 +vat per choke plunger which is not to bad all the manuels keep on about make sure you route the cables correctly do i take it its commonsence i.e no sharp bends or snags when turning your bars etc as i can find a correct routing picture anywhere dose anyone have a piccy or are all bikes different?
Thanks Wheelie