Im in big trouble...XL250R

[donnydon]

1982, XL250R CDI unit, The wires that fit into the nylon (male) plug have come out.....
now im not knowing which wires go to which prongs on the CDi unit.... Please Please Please... Help!
PS theres is info in haynes book but no references to simbols.
I Know its a big big ask......But i recon the only chance I have is to recieve help from one of you good fella's,
i,e it would mean seat and tank lift off and note the wires that you find.... Please Please Please Help..

[donnydon]

[catteeclan]

Hiya Don.

Weather permitting I'll get the tank off my 500r tomorrow. I'd be very surprised if they're different.

[donnydon]

Hiya Don.

Weather permitting I'll get the tank off my 500r tomorrow. I'd be very surprised if they're different.

Good Man.....Very very good man...

[catteeclan]

As you look at the cdi,

Black/white----------Red/Black (top two)

Black/yellow---------Green
Blue yellow----------Green/White (bottom four)

[donnydon]

As you look at the cdi,

Black/white----------Red/Black (top two)

Black/yellow---------Green
Blue yellow----------Green/White (bottom four)

Thanks Thanks Many Many thanks............
But r you looking at block connector from the side the wire enter into block or the block side which penatrates onto the cdi unit ???

[catteeclan]

Sorry, from the side the wire enter into block

[donnydon]

Sorry, from the side the wire enter into block

So, that would be as my picture posted but picture up side down.. yea?
P.S is your cdi unit identical to the one shown in my picture?

[donnydon]

Sorry, from the side the wire enter into block

So, that would be as my picture posted but picture up side down.. yea?
P.S is your cdi unit identical to the one shown in my picture?

[catteeclan]

So, that would be as my picture posted but picture up side down.. yea?

Yeap.

P.S is your cdi unit identical to the one shown in my picture?

Looks the same yes but they'll be programed with a different engine map.