XR600R 87 Mystery part

[Alfie]

Hello,
Looking everywhere for the part in photo below as mine is held together by a cable tie, can anyone help me find one, or even what its called,
Its the part bolted onto the Carb that the throttle cable passes through and holds the cable adjusting nut. See photo below
Any help will be greatfully recieved,
Alfie


http://i261.photobucket.com/albums/i...s/RIMG0003.jpg

[Mervinh]

Alfie what model is it off will search parts lists if i knowexact nodel

Merv

[YEN_POWELL]

I think the part you are missing is part of the cable rather than the carb. http://www.cmsnl.com/honda-xr600r-87...ist/F++03.html

[Alfie]

Hello,
Its XR600R 1987 thats all I know (Photo of Bike Below if that helps)
Quote 'think the part you are missing is part of the cable rather than the carb'

Hi Yen, Had a look on the diagram and cant see it, what number do you think ?

Thanks,
Alfie

http://s261.photobucket.com/albums/i...t=RIMG0060.jpg"

[YEN_POWELL]

Hi Yen, Had a look on the diagram and cant see it, what number do you think ?

Thanks,
Alfie

]Image hosting, free photo sharing & video sharing at Photobucket

Bottom end of either 1 or 3 depending which is the pull cable. It's just a bit of hollow threaded bar (the end of the cable sheath)with two nuts usually.

[YEN_POWELL]

Like my clutch cable pictured here, same thing for your throttle cable.

[Alfie]

Thanks for your Help Guys,
From what I can see, Its not the screw part thats broken.
Its the shaped metal peice bolted onto the Carb that holds the Threaded bit that is broken...... or am I wrong ???

Yen, I see what you are saying that its parts of the threaded throttle adjustment thats missing ? it just seem that the angle of the cable after it leaves that threaded bit is all wrong and some sort of cable guide is missing ??

[YEN_POWELL]

It looks to me like it's not the right cable, there should be a nut either side of the bracket which I think is fine. The threaded part of the cable should slip inside the bracket then there should be a nut either side. Yours has the threaded bit all on one side.

You are missing the pull cable completely I can see the empty bracket for it.

[Kjell Lindberg]

[AIRWOLF]

Nothing missing, . . . it's the wrong cable.