XR200 ??

[Train Driver]

XR200 what year is best, when i last asked at my local shop they all said 1990 but that was in 1997.
Are there many around still

[Lumiya]

A local shop in Barton-Le-Clay?? Is there such a thing?

[phil w]

Shaun aka XRnut is the man to ask, he has a wealth of knowledge on the 200

[Train Driver]

Ok not local as in Barton-le-clay but when we travel out to the big town
Dunstable
in the early 90's I had a 200 and couldn't get any advice and when the shock went i ended sending it to White brothers in California for repair.
Is A363 VML still out there

[Lumiya]

Errrr, where abouts in B-L-C are you, we pass by there quite often

[hondaxrnut]

hi its xrnut,
what do you want to know on the xr200?
i have several of these bikes and theres not much i dont know

[rjday63]

hi its xrnut,
what do you want to know on the xr200?
i have several of these bikes and theres not much i dont know

Hello! New member here, and I'm hoping you can help me. I recently purchased a 2008 XR200 here in the Philippines, and I need to adjust the connection of the clutch cable to the handle. Could you possibly send photos that would show me how to do this? First-time bike owner here, and I'm trying to do this without a manual.

Many thanks for any help you might offer,

Rick

[doglegdon]

First-time bike owner here, and I'm trying to do this without a manual.

Why? Much easier if you use the manual(and take off that blindfold too!!!) Don't worry Rick, someone who knows, will be along in a minute.

[rjday63]

Thanks! I'm waiting for the manual from my friend who sold me the bike, but I'm anxious to get this adjusted so I can take the bike out. I look forward to hearing from anyone that might be able to help.

[doglegdon]

Thanks! I'm waiting for the manual from my friend who sold me the bike, but I'm anxious to get this adjusted so I can take the bike out. I look forward to hearing from anyone that might be able to help.

Since you're in Dumaguete, try to take it to Du Ek Sam's the Honda dealer, they have a workshop at the back of their showroom on Real Street(North National Highway). They don't charge alot to fix you up and you are allowed to watch, then DIY, next time!