Rear wheel Bearings 2003 XR250 ?

[Mauser]

6203 2RS SEALED BEARING 17X40X12mm
6303 2RS SEALED BEARING 17X47X14mm
Are these correct for a 2003 XR250 ?
99.9% sure they are correct but wanted to check before ordering.

[416cc]

Give the parts dept at Fowlers of Bristol a ring on 0117-9770466 as they are very helpful with this sort of question.

[Mauser]

Wasn't planning on getting them from a stealer, there are some decent bearings on fleabay which will do nicely, just wanted to check dimmensions but no matter will pull old ones out and measure them.

[motopsycho87]

got some from this guy

eBay My World - bearing-pit-stop

very good, very cheap !

[Mauser]

got some from this guy

eBay My World - bearing-pit-stop

very good, very cheap !

Any chance you can post the numbers off the face of the bearings ?.
I like branded bearings like Timkin, SKF etc, my local bearing supplier doews un-branded bearings but would rather spend a few quid more and get some branded.

[416cc]

Wasn't planning on getting them from a stealer, there are some decent bearings on fleabay which will do nicely, just wanted to check dimmensions but no matter will pull old ones out and measure them.

I meant ring Fowlers & ask what size/code number the bearings are as they don't mind helping out with technical info like that.

I always buy my wheel bearings from a local bearing specialist...usually SKF or Timken.

[Mauser]

usually SKF or Timken.

Just like me on those brands, my local stockiest wants close to £16 for a pair can get Allballs for £12.99 of fleabay but can get SKF or Timken for about £8

[motopsycho87]

Any chance you can post the numbers off the face of the bearings ?.
I like branded bearings like Timkin, SKF etc, my local bearing supplier doews un-branded bearings but would rather spend a few quid more and get some branded.

XR400 Wheel Bearing Information - ThumperTalk

[Mauser]

XR400 Wheel Bearing Information - ThumperTalk

That's for a 400 are the 250 spindle the same size ?.

[Mervinh]

simplybearings
good prices and you can select the qaulity of the bearings