Rear Sprocket Bolts

[jasonbc]

I can get the bolts to spin in the noles no issues, I've drilled on out cos I've mullered the Allen hex and it seems that some joker has Stud locked the nuts on... That combined with corrosion in the threads and a bike thats been sitting for three years before I got hold of it isn't a good thing for taking stuff like this apart.

Thanks for all the help, I'm off to order some new bolts and am going to drill out the rest after the MotoGP...

Happy Dayz

Cheers

you can always try hammering an oversized imperial allen key in to the bolt head thats been rounded off

[BobA]

Use HEAT!!!

If you don't have a blowtorch try slowly pouring boiled water straight from the kettle onto the nut. If the hex socket is knackered, try holding the head with a pair of mole grips or hammering a Torx bit into the hex head.


Good Luck

[bluestoesonnose]

Got the Dremell out and cut the nuts off, sometimes its not worth messing about with these things, I was always going to have to buy a new set of bolts. Only took 30 mins...

Cooleo