Honda XRV Forum banner

125

  1. XR125 05 Carb Question

    XR
    I have just bought a 05 xr125l it does however need a new carb. I have found carbs that will fit and work but none seem to have the heater like the stock one fitted. If I got a standard carb with no heater will it run ok or so I need one with the carb heater. thank you :)
  2. Kat EFI

    Suzuki
    Hey guys, I am from Sydney Australia, And own a 1982 Suzuki Katana 7/11. Noticed you have fork extensions. Am trying to fit 07 Bandit 1250 forks to my spare Kat and maybe those fork extensions might be a fit. Can you tell me what size they are and the thread pitch as well. My forks are 43mm...
  3. For Sale: XL125 / 185S 1982 Parts

    For Sale / Wanted
    I have a collection of spares for both XL 125 and 185S models from around 1982 accumulated by may Father over the last 10 years that I feel deserve a better home than the corner of the garage Parts include: 185 Drum Forks 125 Disc Forks Front and rear wheels with Drum Brake Front Wheel with...
  4. 83 XL 125 help

    XL
    Hello My son has just bought an 85 XL 125 Whilst dooing the deal the seller said I have another 1983 XL 125 in bits in the shed, so I bought it as I wanted one 30 years ago. I now need help as the rear suspension is seized and been cut out! Looking for a parts diagram for it but cant find one as...
  5. Need some help

    Chatter
    I need a bit of specialist advice regarding my sons Yamaha DT 125 LC project so if Nick in Brum shows up in any of the posts could you kindly ask him to PM me or send me his e mail address..We are having electrical issues and Nick knows about these bikes...I have sent a PM to him but he hasnt...
  6. For Sale: Various New Old Stock RD03 & RD04 Swing Arm Bearings and Seals

    For Sale / Wanted
    I have a selection of new bearings left over that are no longer of use to me: - 91071-KS6-004 x4 Swing Arm Needle Bearing 52141-MM9-000 x2 Swing Arm Bearing 52473-MS8-000 x2 Rear shock linkage Bearing 52144-KR8-005 x2 Swing Arm Dust Seals 91254-KS6-003 x1 Dust Seal 52109-MM9-300 x2 Swing...
  7. XR250 rear wheel!

    XR
    Just giving my XR250 a service after finding her again after I sold her 15 years ago. Mortified to find that the rear rim has split! Cracked right through!!:( Has anyone on here got a spare? Or could tell me what else would fit? 1988 rim stamped J18 X 1.85. 587 DOT
  8. For Sale: FOR SALE: Arrow Exhaust for XRV750

    For Sale / Wanted
    Exhaust just removed from XRV750 RD07A '97. Very good condition. Collect from Ringwood Hampshire or I can send via Hermes Courier. Asking price £100 + Courier cost
  9. Bolt identification

    XR
    I'm looking for a place to install an oil temperature sensor. Does anyone know the purpose of this bolt (center of picture) and what the clearance behind it looks like?
  10. ISO Australian XRV or Taller Dualsport: Buy, Rent or Trade for American SW XRV750

    Africa Twin
    Australian XRV Riders, Hello. I hope this post finds you well. I am about to finish a two month tour of New Zealand and will visit Australia for three to six months. During my tour of New Zealand, I was fortunate to purchase XRV750 (RD04) with local support. I have owned a couple Africa...
  11. Transalp 600 (1994) Fan direction?

    Transalp
    Odd question I know Fan switch was faulty and welded solidly in place in my 1994 600 Transalp I fitted a manual switch instead, and although it is just replacing the original fan switch I am now obsessing if somehow the fan is running the wrong way. When in heavy traffic the fan doesn't seem...
  12. carbon chain guard

    Africa Twin
    Hi all ,just had enough time today to remove the chain guard from its mould i think it came out pretty good but it is the 1st one so i am sure it will improve.hope you like it as i hope to make more..
  13. Can you identify this aftermarket exhaust on my XRV750 RD04?

    Africa Twin
    Hello AT Fans! Can you identify this aftermarket exhaust on my XRV750 RD04? It was installed on an AT I purchased and I am unable to locate any stamps or reference to an aftermarket manufacture. It sounds really nice on the V-twin. Any thoughts or guess? Thanks in advance!
  14. Malcolm Young..RIP.

    Chatter
    Bit of a sad day today.. Malcolm Young, founder member of AC/DC died yesterday in Australia...:(:(:( Him and his brother created on of the greatest Rock bands of all time.......RIP. I am so glad I got to see them perform in Hannover with my son a few years ago.... https://youtu.be/ZDCs7ijNUVM.
  15. xl600lm

    XL
    Hi, I am new to his forum and this xl600lm is my first Honda for a while, I am trying to find out wtf bodywork is fitted to this bike I just bought. Its had new paint but I cannot find any details about this headlight/fairing unit. Hope someone can throw some light on this bike, regards,,
  16. Attempting to make a 20mm box bender.

    Mechanical Advice
    Building a 20mm box bender. Hi guys, I am in the process of building a flat tracker from a Varadero frame. I'll post a thread up when I get a chance, but here's a picture of the project. At the moment though I need some 20mm box section bending so I can fabricate a rear subframe. Here are...
  17. Pillion footrests RD04 (& RD03?)

    Africa Twin
    I have a slim Arrow silencer fitted to my RD04 which makes the offside(UK) pillion footrest appear to stick out. As I do not carry a pillion I have removed the large pillion footrest castings and replaced them with footrests that screw into one of the casting mounting points and short round head...
  18. XL125 spark advancer puzzle

    XL
    Recently rebuilt a 1980 CT125, had high rev misfire, ( similar to "4 stroking") appeared to be due to cam shaft journal wear "bouncing" the points so had bearings made and fitted, still had a misfire which stopped when the advancer was locked, Someone previously had welded the original advancer...
  19. XR 125 LED 3P connector

    XR
    Hello Has anyone changed their indicators to LED ones and what is the relay that will work properly ie proper 'flash' rate ...I notice it's a 3P on the XR L6 and that there are only 2 pins wired in ones I've seen on ebay? I'm not very clever with electrics,but is this the kind of thing I should...
  20. Need a new project

    Chatter
    I just spent an afternoon helping jnr polish his bike up after it passed its MOT. All he needs now is new tyres and a pair of Dunstall replica silencers which are on order...;););) His Yamaha DT 125 is also sorted so looks like i can turn my attention to finding my next project....:D:D:D...
Top