Search Results for ‘advance’

Hi ive bought a 97 XR400R but upon inspection its got a broken valve which in turn has damaged the head too much for repair so im looking for a head preferably with valves/cam etc im in UK? Thanks in advance.

I can not seem to find out where the rear stop switch spring attaches to the rear brake lever. Can anyone enlighten me with words, pictures or video?!! Many thanks in advance

Can anyone post a pic of rd04 panels on an rd03 do they fit? thanks in advance

Hey all, I need a new screen and after lots of searching around I have found the one shown in below.... I now need to know where I can buy this exact same screen from. Any suggestions please? Advance Thanks

Hi all, I've quite a bit of work to do this year on my '91 RD04 and I'm wondering where's the best place to buy a workshop manual? I've seen some for crazy money on eBay... Anywhere else I should be looking? Thanks in advance, Dar Sent from my SM-G935F using Tapatalk

Has anyone rebuilt the rear shock on the '88? There doesn't appear to be a rebuild 'kit' out there? Anyone done it? Thanks in advance.

Hi All, I am looking for a crankshaft or engine for my rd07a 2001 xrv750. I know both are long shots and tough to locate but I thought I would ask on the forum first. I believe all africa twin xrv750 crankshafts are the same part number from 1990 onwards. Many thanks in advance, Ian

Good evening I'm in the process of changing the front sprocket on my RD07a. I removed the sprocket cover and then the old sprocket. I was merrily cleaning all the old crud away before fitting the new one when this little fella dropped out. I have no idea where it goes so any help would be...

Wonder if you guys can confirm what width Excel rims you have relaced to OE Hubs ? I am a Michelin dealer so want to use Michelin Anakee Wilds so 110/80/19 or 120/70/19 front with 140/80/17 or 150/70/17 Thanks in advance

As per title has anyone got one lying around needs to be fairly good rd07a only Thanks in advance

Hi! I know there is a thread somewhere but i couldn't find it. Which is the maximum height of risers one can add without changing all the cables? And can someone recommend me some? Thanks in advance

I have finally received my new starbars ready for fitting at the weekend. Question I have is this....the original bars have holes for the instruments, do I drill new ones or remove the bits that slot into the holes on the instruments? cheers in advance

Hi All Anyone have a Transalp 700 bashplate/engine guard to replace the plastic one out there? Thanks in advance. Regards Simon W.

Hi guys and thanks for adding me to the group, I am the proud owner of a XR250R 1987 , I am having problems with the silencer , what else will fit on here as originals are not an option I think , thanks in advance. Karl From England

Well lads that time again where I'm thinking of my next bike, I'm leaning towards another Dominator but they seem to be slim on the ground in this neck of woods (ROI), I am wondering if anyone here has had both and would you recommend one over the other? Thanks in advance:thumbright:

Hi All, Can anyone steer me towards an online shop manual for a 1984 XR250R? The Honda part number is 61KK001. Many thanks in advance, Steve.

Hi all Can someone please advise me my bike has no spark but lights come on when using kickstart have checked plug and cap all seam good I have looked at the stator coils and have seen a small amount of damage Is this enough to cause the problem Hope to attach a pic Thanks in advance Rich

Fixed my carb float needle with a new one, now looks like I need a carb bowl gasket as thats leaking:rolleyes::rolleyes: Anybody point me in the right direction, Dave Silvers or Wemoto dont seem to have any listed? Thanks in advance

Hi all, Could anyone tell me, if i can get stainless headers for my Africa twin RD07A so that i can order. Thanks in advance, Terence :thumbup:

Hi. I have an rd04 left hand rad has broken. A local breaker has an rd04 rad in stock. Will an rd04 rad fit on an rd04??? Thanks in advance.