Honda XRV Forum banner
advice
1-17 of 500 Results
Advanced
  1. Dominator / FMX
    Hi all, I've put about 1000 miles on my FX now and as it turns out it is burning oil pretty badly. I know this because in the space of 5 days and roughly 800 miles the oil went from the middle of the dipstick to below it, the only reason I noticed this was due to my oil temp dipstick going down...
  2. Africa Twin
    I seek advice from people with experience with the MRA varioscreen V (new full screen) and the MRA vario touring (clip on top of old screen) part. I suffer from high windnoise on higher speeds. Been looking for reviews and comparisons, but not alot to find. I'm 6 foot 2 inches high. I like the...
  3. Transalp
    How do I'm after some help/advice about the oil warning lights on the 700. Riding in to work today - second day back after a week or so off - and one of the red lights on the dash starts flashing. Initially it blinked a couple of times, but then came on and off under acceleration and braking...
  4. Africa Twin
    Hi everyone, I am a proud owner of a AT RD07A 1997 (Name TOTO) I experienced a bizarre moment this morning as was riding, Toto decided to cut out leaving me with no lights or ignition button working( dead ) 10 minutes later after waiting on the side of the road she started again ! Now I will...
  5. Transalp
    Hi all, I was wondering if anyone had any advice on who to go to for parts? Who is the best / best value / most helpful supplier? I also need a new battery and was wondering if I should go for a direct replacement or find a more modern sealed battery? Cheers!
  6. Africa Twin
    I would like to replace my coolant hoses on my RD03. Honda parts are NLA. I was reviewing threads about the Samco or other aftermarket hoses and found threads that stated that some hoses were incorrectly sized. Those hose kits are pretty dear. Can't see paying that much for parts that are...
  7. Africa Twin
    Has anyone here replaced their steering head bearings? If so...how did you remove the bearing 'race' that is on the lower yoke? This thing... The internet suggests - using a chisel - using an angle grinder - using a dremel - using two screwdrivers - using some sort of special tool so...how...
  8. Transalp
    Has anyone here replaced their steering head bearings? If so...how did you remove the bearing 'race' that is on the lower yoke? This thing... The internet suggests - using a chisel - using an angle grinder - using a dremel - using two screwdrivers - using some sort of special tool so...how...
  9. Transalp
    Hello all, I think I need a new battery as mine gets discharged sometimes like this morning I couldn't start the bike. Any recommendations? I don't want to get a lithium one if I don't have to as they are over 100 quid but I will get one if it's worth it I use the bike every day rain or shine...
  10. Transalp
    Hello all, My tranny just died while out in spain, the con rod snapped appaently! I have my eye on a 1996 PD06 engine to replace the old one. I hear that the 1996 engines had a "new whole electronic (TCI) ignition system (new ignition unit, new impulse ignition coils, new ignition advance...
  11. I'd like to introduce myself....................
    Hi everybody, I am new to this forum. Just bought an XRV750rd07a full stock that I am planning to rebuild to a lighter and more offroad capable travel bike. One of the ideas is to install Supersprox sprocket and 520 pitch chain to reduce weight. Anyone any advice or experience having done this.
  12. Transalp
    I fancy a change and I am thinking of putting my 2009/10 XL700VA Transalp up for sale. It's in good condition and regularly maintained. Lastbig service was undertaken by the dealer and re-set the valve clearances. It's got 67,000+ on the clocks. Has the OEM Honda topbox on and is in the...
  13. Africa Twin
    Last time I fitted a mosfet I got wiring kit from eastern beaver and with handling fees cost nearly fifty quid. This time I have ordered the fittings from uk but I need some advice on the battery to mosfet wiring size, this is what I was going to buy but would like someone with more knowledge to...
  14. Dominator / FMX
    My nx650 RD02 (1989) is in need of a new shock. The current shock is an old Hagon that is at least 20 years old fitted by the previous owner and I doubt very much it is serviceable by the look of it. Im on a tight budget (meaning I don’t want to spend a fortune) but need to replace it...
  15. CRF - New Forum!
    Hi guys. First of all, warning: I am not very good in motorcycle repairs and maintenance :) Around three years ago I have purchased brand new CRF250 Rally here. Until not long ago everything was just fine. But last month I have noticed that my bike start to become very-very hot - and much...
  16. Dominator / FMX
    Greetings from Denmark.. I havnt been on here for a while because I have been busy building other bikes... I want to build a cafe racer from a Dommie with a single sided swing arm and usd forks like this one I found on the net. I have bought a single sided swing arm from a VFR 750 F with a pair...
  17. Africa Twin
    Mines gone all crackeled. Seems like many have done the same. Hoping someone has some advice before I start cutting it up!!
1-17 of 500 Results
Top