Honda XRV Forum banner

airbox

  1. XR400 Exhaust Diffuser/baffle tube and Duct/Snorkel for airbox

    XR
    I'm trying to return my XR400 to standard specs. As it seems that many XR owners remove these items, I'm hoping that someone has a diffuser and snorkel for sale! If you do, please send me a message. Thanks.
  2. Wanted: NX650 Airbox Snorkel

    For Sale / Wanted
    The part number and description are 17253-MAN-600 TUBE,AIR CLEANER CONNECTING Mines got old, hard, and has a crack now. Cant seem to find any online.
  3. Wanted: Wanted - RD04 nuts, bolts, rear wheel spacers, carb to airbox rubbers.

    For Sale / Wanted
    During our move a box has been misplaced :( Now I have time, space and money to start this rebuild. A lot of xrv rd04 have been broken for parts but no one seams to keep the little things ! Pricing these small items new, very expensive. Thank you. Safe Riding.
  4. where should the cam cover breather route too?

    Dominator / FMX
    As above my dominator engine has a breather tube on the cam cover but it is open to the air,this seems wrong where did it go originally? Idont use the airbox from a dominator and wonder how it was connected
  5. problems refitting the airbox 1987 TA

    Transalp
    Hi Is there a knack to fitting the bit of the airbox which connects to the carburettors? I tried for ages yesterday and got nowhere. Each time I thought I had it all lined up nicely, I pushed down on the top and the hoses either squashed down or it looked like it had fitted then when I let go...
  6. CV carb (and Dave's mod)

    Dominator / FMX
    Hey NX650 from 1988. Have a jet kit in the mail and planning on doing Dave's mod. I wanted to take the carburetor apart and clean it up before hand, but having trouble getting two of the screws in the float chamber out - seem very soft and I don't want to ruin them. I have PH and PZ...
  7. Running without a battery

    XL
    Hey all! This is my first post.I recently bought an'82 XL250R(MD03)which has seen better days.My intention is to do a scrambler type build with it so want to get rid of the airbox and battery.Can anyone tell me if the bike will start and run without a battery? Or could I use a "battery...
  8. Choke won't stay choked

    Dominator / FMX
    My Dommie's choke won't stay on, I pull in the lever for cold starts but then it just creeps open again from the vibes before the engine is warmed up. Does anyone know how to tighten it so it only closes when I want it to? The last vehicle I had with a manual choke was a 1971 Mini! The choke...
  9. 85 XL350r. Airbox and Wheel Spokes

    XL
    Good Day All, I'm rebuilding an 85 XL350r. The airbox was a pain to remove but I got it removed. Had the same issue with my 90s CR 250, seems Honda doesn't want us touching those airboxes. Question: Does the airbox come part? It seems like it's molded together between the 2-carb tubes and...
  10. Random Air spurting sound from under tank/Airbox area

    Africa Twin
    Hi all, i'm new here. Been reading quite a bit about the AT and loads of knowledge here. I just got my AT about a month ago. Its a 2001 model and i have a couple of issues with this beauty. 1) idling is low during first start up and bike requires choke each time. Just a quick pull of the choke...
  11. New NX650 rider from Australia

    Dominator / FMX
    Hi all, Had my Dommie for a couple of years, can't believe I hadn't found this forum earlier! Here it is, stock '96 model with around 55,000km I live near Albury NSW and like to get up into the dirt mountain roads of NSW and Vic for overnight trips. Couple of questions: * Anybody else in my...
  12. Replacing airbox

    Dominator / FMX
    The airbox on my RD08 Dommie is holed / cracked, has been since before I got it AFAIK. The hole is currently patched with gaffer tape, which I just replace from time to time when it gets knackered from road-spray. I did get a replacement airbox on eBay, with a view to swapping them one day...
  13. Check your airbox!! Perished carb tubes

    Africa Twin
    I'm still slowly rebuilding my bike. Luckily I decided to give the airbox a wipe over with a rag and saw that the tubes have perished and come away from the main body. The one that looks worse, I pulled to make sure I wasn't imagining things. I figured if it's actually fine it won't tear, and...
  14. For Sale: Breaking "w" reg Transalp 650

    For Sale / Wanted
    I am breaking a W Reg Transalp 650, parts available include; front wheel, fuel tank in silver, left hand radiator with cooling fan, (might separate) complete airbox, starter motor, alternator, engine / gearbox / clutch covers, most hoses, most brake parts most cables , most pedals E Mail...
  15. Wanted: XRV750 Rd04 airbox rubber. These are no longer available.

    For Sale / Wanted
    I am sorting out a '90 model. Has anyone found a suitable replacement rubber? Thanks Geoff :thumbup:
  16. AT airbox.

    Africa Twin
    As part of the stripdown the airbox came off and so I naturally had to clean it up. So I have questions about it. Is the airbox better than individual filters ? Would there be a downside to binning the airbox? Resonators? What purpose? I'm thinking its a lot of trouble to go to making such a...
  17. Pod filter on a XL600V with stock carbs?

    Transalp
    Hi, I am aware that pod filters usually are banned on forums :), but I am currently rebuilding the bike and would like to clear up the area under the seat for design reasons. Anyone have any experience of removing the airbox and add two pod filters directly connected to the stock carbs on a...
  18. RD03 Airbox Element seal configuration

    Africa Twin
    Need some help getting my element seal in my airbox. When I got the bike,it had a K&N so I've had to buy the new parts. The fiche is helpful, but when I went to install, it all became a bit of a puzzle getting the rubber seal in and then installing the element filter..... Can anyone tell me...
  19. Airbox plastic is bent in my 650

    Transalp
    Does anyone know if such a bent in the airbox plastic is something serious?
  20. RD04 Help PLease

    Africa Twin
    Hi, I need to source the rubber link section that goes between the Air Filter housing under the seat, and the other Airbox thingy that sits on top of the carbs - mine has split! Any idea where to source one? Am i best going to my local stealer, as searches on a well known auction site appear...
Top