alignment

The disc brake on my 650 was warped. After having the wheel in and out several times and trying different measurements it was the disc mounting pads on the hub that were out alignment. Adding shims under two of the pads on the right disc bought them back into line. Has any body else had this...

Saw this on a trip yesterday. So what's going on here? I set the left 2 clicks further back than the right side, which seems to have helped.

Having just popped my wheel back in I thought I'd check the alignment, and noticed that the distance from the LHS of the swingarm to the rim is 7cm, and 5cm on the RHS...Is the swingarm symmetrical, or is it offset cos of the sprocket etc?

Hello all! First post here, hope this is the right place for it :o) I have a 1994 NX650 and the front wheel is wonky. I first noticed that it was wrong after having some new tyres fitted, so at the time simply assumed that they'd fitted the front wheel back incorrectly, but now having taken...

I've noticed that the "Pro-Link" linkage does not sit equally between the mounting lugs on the swingarm. The link is closer to one side (nearly touching) than the other 5mm gap. Is this normal. The only link in the whole assembly that can be assembled differently is the "dog bone" anchor link...

Hello, I'm currently in the process of servicing the alp after a few months of inactivity, done the valve clearances, removed and cleaned the carbs and thats where the problem lies. Upon refitting the carbs they do not sit straight, they are at an angle inbetween the frame when looking down onto...

The vertical alignment of the lapm is ok but I whould set my headlight horizontal a little right. It is possible?

Hello Folks, A newbie question :mrgreen:, I had to tighten my chain on my TA and now want to check the wheel alignment. What is the best method:confused:? Thanks Folks :) Billy