Honda XRV Forum banner

bent

  1. For Sale / Wanted
    Transalp 1992 600 cowl& screen, dash, RH side panel, front bracket More bits from my ‘naked’ TA project look at the pictures Dash panel £6 Front bracket (bit bent see pics) £5 Cowl & standard size screen £25 RH side panel £25 (LH side panel was cut up for project but not used! ) Collect from...
  2. For Sale / Wanted
    Hi , I'm looking for a straight front sub-frame as mine got bent in a fall. It's like the one in the picture. Would you have one in straight condition? If so, please PM me. Cheers Pete
  3. Transalp
    Hi, Would anyone (preferably in the UK) have a straight headlamp/fairing sub frame they may be interested in selling? (Picture attached.) Don't mind if it's rusty and in need of painting as long as it's not bent. If so, please send me a message with how much you'd like for it posted to Surrey...
  4. Africa Twin
    I'm looking for some help on the mounting of the chain slider. I've been working on a restoration and it has been some time since I've been at it due to health reasons. When I went to put the slider on, the mounting point does not seem to be right. I'm wondering if one of the points has been...
  5. Transalp
    Someone helpfully drove into me this week, they hit the very front of front wheel (from the side) i have slackened off the top and middle yokes, removed the fork brace and mudguard, and bashed the wheel against a lampost but I can't get it straight/true this photo was taken with the wheel...
  6. Africa Twin
    Well the old girl will be stripped and a complete overhaul undertaken around the end of March. Now the original radiators are in a poor state but not leaking the fins are bent ect ect .... So does any of you out there have any experience with the alley ones from say Czech Republic or the...
  7. I'd like to introduce myself....................
    Yet another bike forum on my list, well I have gone and done it, I have been mulling over it for a while should I shouldn't I get a dommie, so here I am looking and watching what all you guys are getting up to with your spanners, hammers, and welders etc etc, so as far as my own dommie is...
  8. Transalp
    Hi,Can anyone recommend a good foot stand extension plate for the XL700?I've had a Cameltoe fitted for a couple of year and although it looked good I was not impressed with the way it bent with use and the bolts were continually working loose. So loose in fact that it now lies somewhere along...
  9. Transalp
    Hi All, I'm doing a quick trip to Brisbane to pick up a doner Trans Alp and need to pull front end and swing arm / rear wheel off to fit on a pallet for shipping to Darwin. I will be cutting the frame to fit it on as the frame is bent and i have a spare. Just after some info on what tools i may...
  10. Africa Twin
    My AT has a set of bars on that are too short for the handgrips(a cheap quick replacement by the previous owner). I have the originals but they are slightly bent, so rather than powder coating them, I was lookig at the Renthal Enduro high bars. Question is...will the original bar ends and...
  11. Africa Twin
    Just dropped my AT today at slow rolling speed and thanks to those Rugged Road crash bars any serious damage was prevented. But the right one took a substantial hit and it absorbed all the force which resulted in it being slightly bent inwards. Is it possible to bend it back? I will post some...
  12. Dominator / FMX
    Hello troops thanks for the previous help much appreciated, now I'm wondering is the front sprocket meant to have some play in it, and what is the correct way round please im guessing the flat side has the retaining clamp as the way I found it other day it had the ridge facing out with the clamp...
  13. XR
    I have recently purchased a XR250 project - Frame number HMME03-5700255 & Engine number ME08E-2314517 I'm trying to identify the year and model ? The cylinder head is off with a bent exhaust valve, and damaged guide. What might have caused this to happen :eek:
  14. For Sale / Wanted
    Hello, I am after a '99 rear brake bracket that the brembo caliper slides on as I have bent mine after beating it with a hammer in anger as the little bugger wouldn't separate! Brakes are binding a bit now as the caliper doesn't slide like it should. If anyone has a spare one lying around then...
  15. Transalp
    It seems standard seats are rarer than the proverbial hen's teeth. There just doesn't seem to be one for sale anywhere - unless you know different ! My 2005 has, what must have been, an optional low seat fitted. It's too low for me to get comfortable as my knees are bent too much. I would even...
  16. Transalp
    At my recent MOT the garage pointed out that the bards on my 1996 alp were bent and needed replacing. I guess renthals are my best option now, but looking at various forums the dakar highs seem to be the consensus, but I cant see them for sale anymore. Which renthal bars currently for sale...
  17. Varadero
    Hi all, I was riding my 125 to work today, I stopped at a junction and i started to hear a loud tappetly sound then my engine died. The engine now will not turn over and is locked. I removed the rear cylinder spark plug and found the end has been broken off, it is bent and has a crack. If I...
  18. Africa Twin
    Hello peeps, this is the third time of trying to post, The chain snapped on my transalp. last week, got away with it, but the sprocket cover bracket bent so a new cover required.My quandary is, l have a complete replacement Africa twin swingarm, wheel and brake, should I upgrade...
  19. Varadero
    Hello, New to the forum! I would like to know if the handlebars of a Varadero 125(2001-2006) are the same as the handlebars of a XL650V TA? The bars on my Varadero are bent and I can get a good deal on a TA handlebars.I'm worried that they might be too big and hit the plastics or the tank at...
  20. For Sale / Wanted
    Does any one have a pannier rack " tube square type one like touratect, for sale really only need exhaust side but would buy a pair , Condition really not to important as long as its not to bent . Mine sits to far out from exhaust for my liking and would like one to experiment with before take...
Top