Honda XRV Forum banner

bet

  1. RD07A MRA windscreens

    Africa Twin
    I seek advice from people with experience with the MRA varioscreen V (new full screen) and the MRA vario touring (clip on top of old screen) part. I suffer from high windnoise on higher speeds. Been looking for reviews and comparisons, but not alot to find. I'm 6 foot 2 inches high. I like the...
  2. Wanted: Old Front Brake Discs

    For Sale / Wanted
    A strange request I know, but does anyone have any old front brake discs for an RD04 lying around? I’m upcycling an unserviceable front wheel into a clock for my garage and I think it’ll look better with a disc on it. Happy to pay for postage. Thanks Sent from my iPhone using Tapatalk
  3. TET North - Anyone tried it on an Alp?

    Transalp
    Guess the title says it all; have you Alp owners tried the TET North (Tynemouth to the Lakes area, via Hexham, Alston etc.) Wondering if it's a little too much for the Alp? Eveyone is telling me a CRF250L or Rally // WR250 is the better choice! Cheers D
  4. Xr650r tires help

    Wheels, Tyres & Tubes
    Xr650r tyres help Hi guys just bought my xr650r couple weeks back and looking to get some new tyres. I will be using the bike for on and off road .I have had a look at maxxis IT they look good is 110/100/18 the bigest I can do ? Has anyone got suggestion on the sizes if I can go bigger or...
  5. short brake/clutch levers

    Transalp
    Hi can anyone recommend some short clutch and brake lever sets. i'm taking my 600 off road and find the levers awkward and think shorter ones would be better. anyone fitted some? were they any good?
  6. Wanted: XR650L Wiring Harness

    Bikes For Sale / Wanted
    Does anyone have a wiring loom from a XR650L for sale? Condition not important as it will likely be modified anyway so the cheaper the better, I'm just looking for a decent starting point.
  7. XRV750N 1992 RD04 magneto question

    Mechanical Advice
    Hi, Can anyone tell me or even better show me pictures of the differences between magneto rotors on an RD04, RD07 or transalp. The motor I bought a while ago only had one pulse coil and the magneto has eight little bumps near the edge. My motor has two pulse coils now as per the recesses in the...
  8. New carbs - Options

    Dominator / FMX
    Hi All, I've tried searching but haven't managed to find a definitive answer. Is there a direct replacement carb that would fit a 1999 nx650? I was going to strip and rebuild mine as it's got the usual tickover issue but if there is a better replacement that could be used I may well just go...
  9. rim tape

    Africa Twin
    Im getting a wheel respoked for my @ and want to use the best rim tape so I have looked on ebay and it looks very thin. I have some used pieces of rubber membrane I used to waterproof a roof and it was way more expensive than I thought and very good quality. Will this be better to use than £1.99...
  10. 600 oil pressure switch wanted

    Transalp
    any idea where one can get one from for a reasonable price?. or better still anyone know the thread size, so i can look into a gauge kit.
  11. Wanted: Wanted cheap project bike transalp 600

    For Sale / Wanted
    Looking for a cheap project/spares repair type bike. Engine not important but the more complete it is the better.
  12. nx 650 poor accelerating

    Dominator / FMX
    non standard air filter and exhaust (nx650 1999 Keihin VE carb) , hesitant acceleration up to 1/4 throttle , above that ok . all points to needing larger pilot/slow jet but already have gone from standard 50 to a 65 . a lot better but still not smooth . Anyone think ok to go even bigger on slow...
  13. For Sale: 2007 Honda Transalp XL650 Blue

    Bikes For Sale / Wanted
    Hi all I am reluctantly selling my bike as I do not have a lot of time for it. No issues. Runs well. No corrosion. MOT till August. Around 11000 miles. Comes with heated grips, full luggage and Scottoiler. Always garaged. Let me know of any sensible offers. Some better photos to be uploaded later.
  14. Air Cut Off Valve Cap Hole Size ?

    Dominator / FMX
    This is the air cut off valve cap Amongst many other things i tried to make sure everything is clean etc So when I tried to blow through this i thought it could be blocked Very difficult to blow through so i thought try pushing something through Tried old fuse wire, nope, tried a pin, nope...
  15. RD03 gearing

    Africa Twin
    My current sprocket setup is -1 front and +3 in the rear. I like this, but I'd like to get better mileage on the road and I want an OEM 16T front for reduced wear on the shaft. Thinking of changing my chain and go to just +1 in the rear or should I go with the stock 46 tooth rear sprocket?
  16. Clicking noise from enginr

    Africa Twin
    Hello co-africans i have a problem. When mybike is on neutral and only on neutral and only when its cold and I pull the throttle I hear a clicking noise coming from the bottom right of the engine It stops after 10 minutes when the bike is better warmed. Should i worry cause i am frightened as a...
  17. Handlebar height

    Dominator / FMX
    Does anyone have a solution to the handlebar height on the RDo2 ? I find mine very low and difficult to use especially when standing on the pegs, i have loosened them and pushed them up a little which is slightly better but causes the engine to race slightly on full lock so not ideal. I like the...
  18. For Sale: Corbin seat for africa twin

    For Sale / Wanted
    Corbin seat for africa twin NOW SOLD In excellent condition with no rips, this makes it slightly lower and definitely more comfortable than original price £125 postage £15 or open to very near offers. pickup at Clayton le Moors, bb5 postcode
  19. New Africa Twin build videos

    Africa Twin
    In a general search for motorcycle factory build videos found these for the CRF1000 AT, better than the Christmas edition of?? 2016 Honda Africa Twin CRF Production Line / Assembly Videos & Pictures - Go inside the Manufacturing Plant! | Honda-Pro Kevin
  20. LED indicators

    Africa Twin
    I wanted to buy a pair of rear indicators but the front look a little worn out too so i think i will go the LED route found a set in china for under 7 pounds with a relay any one else bought a set from the east ? Wanted to keep it original but i fugure it would be a wise upgrade better to be...
Top