Honda XRV Forum banner

bits

  1. For Sale: Transalp 1992 600 cowl & screen, dash, RH side panel, front bracket

    For Sale / Wanted
    Transalp 1992 600 cowl& screen, dash, RH side panel, front bracket More bits from my ‘naked’ TA project look at the pictures Dash panel £6 Front bracket (bit bent see pics) £5 Cowl & standard size screen £25 RH side panel £25 (LH side panel was cut up for project but not used! ) Collect from...
  2. Output shaft renewal

    Transalp
    Started to change the output shaft on my 700 XL. All the bolts holding the chrome heat shields and the painted heat shields were sized in so that took me around 4 hours to do, I’m a slow worker, drill out re-tap the holes and order new bolts. The rest went as I expected it to no real drama...
  3. For Sale: Transalp XL700 Pooratech bits for sale.

    For Sale / Wanted
    Now that I've moved over to an Africa Twin I have a few Pooratech protection bits for sale. These were made by myself to go on my Transalp XL700V (ABS). The parts are all made from stainless steel. They have been on my old bike for about 6 years but still look in good condition. They've not...
  4. For Sale: Africa Twin RD04 crash bars

    For Sale / Wanted
    Hi guys, Got a set of original black crash bars for an AT RD04, for sale. Asking 110 EUR which is about 95 GBP ? Don't know how to upload here but can send them by email, pictures. For perfect condition they need some new paint. Comes with all bits to attached them to your bike. Can ship...
  5. Another dead RD07...

    Africa Twin
    OK, so I got home the other day, put bike away as normal, no problems, but next day...nothing. No lights, nada, dead. Getting in there with my multimeter, I diagnosed a knackered ignition barrel, swapped it for a new one from David Silver and the bike started first time, roared into life. Great...
  6. Wanted: Garmin zumo 660 cradle harness and bits to attach to bars

    For Sale / Wanted
    As it says in the title, have two bikes, one fully kitted with satnav zumo 660, would like to use it on my AT. Anybody got the parts I need, for sale. Getting difficult to find them in the shops Thanks UK address or Irl address for Irl seller:nike:
  7. For Sale: Metal Mule Panniers For Sale £350

    For Sale / Wanted
    Metal Mule Panniers for Sale. £350. Here we have a very nice pair of Metal Mule panniers. 2007 vintage and only used Half a dozen times in anger and for a few commutes or shopping trips in between. 38litre capacity each. Usual top quality MM panniers they don’t make them like this...
  8. RD03 - What do these electrical bits do?

    Africa Twin
    Hi all, I'm trying to work out what a couple of the electrical components on my RD03 are doing. I would like to carry spares for all of the 'game over' failure parts when touring. I don't understand why the indicator relays have two different part numbers, anyone got a clue? 38301KJ6743 -...
  9. 1998 RD07A rebuild

    Africa Twin
    Hi all, Started the rebuild process last week at last! Thought I would start a tread about it as I do like to read a good rebuild post and happy to receive any suggestions that go along with it. Happy with my progress so far but I think this is going to take a long time before it's back on the...
  10. Bored with your Varadero? Enter "Project Varaturnipstorm or Fireturnipdero"

    Varadero
    Project VaraTurnipStorm or FireTurnipDero. Now I know I’m still working on the Tracker project, but after thinking of this name I just had to start a thread before someone else does & pinches the title. Ha. The idea has come around after reading up about various Harley XR750 flat track based...
  11. Swingarm adjuster snapped

    Mechanical Advice
    Hi all, (newbie) , just done a post on the crf page but think posting here may get more response, iv recently purchesed a 2014 crf 450r, on adjusting the chain I found a seized adjuster and yes like a t**t I snapped it trying to undo, iv tried several metal drill bits to drill out without...
  12. Crf swingarm adjuster

    CRF - New Forum!
    Hi all, iv recently purchesed a 2014 crf 450r, on adjusting the chain I found a seized adjuster and yes like a t**t I snapped it trying to undo, iv tried several metal drill bits to drill out without success, my question is can anyone recommend a drill bit that will get through the snapped...
  13. Wanted: 600 Transalp Centre Stand

    For Sale / Wanted
    Has anyone out there got an un-wanted centre stand for a 600 Alp (mines a '98 model, but earlier ones should fit)? Checked with that excellent source of new Honda parts, David Silvers, and apparently the stand is no longer available. The after market availability of a stand is very patchy as...
  14. For Sale: XL125 / 185S 1982 Parts

    For Sale / Wanted
    I have a collection of spares for both XL 125 and 185S models from around 1982 accumulated by may Father over the last 10 years that I feel deserve a better home than the corner of the garage Parts include: 185 Drum Forks 125 Disc Forks Front and rear wheels with Drum Brake Front Wheel with...
  15. Confused with pipe/tube routing

    Dominator / FMX
    Hi Guys, so yesterday I rode the Dominator to work for the first time since the bike has been in bits and put back together. I'm not sure the vacuum pipes etc are correctly configured and wondered if anyone can help. All photos are pre strip down and they themselves may or may not show the...
  16. Honda XL125 (1978) How much is it worth

    What's it worth?
    Hi, do any of you guys have any idea what a 1978 Orange tank black side panels Honda XL125 is worth at all please. She has seen a lot of better days, bit scruffy and in need of quite a few parts inc wiring harness and silencer. Got a dink in the tank too. Got a list of about 30 bits to find...
  17. Wanted: Pete wanting to see what bits are out there for a 1977 Honda XL125

    For Sale / Wanted
    Hi, just about to buy an old 1978 XL125K2, with the orange tank and black side panels, that's looking tired and neglected. She is in need of some TLC and some parts. My list consists of about 30 parts from memory, I know that's almost the full bike. Looking to find out if anyone has the main...
  18. Pete

    I'd like to introduce myself....................
    Thanks for letting me join the forum. I have been biking since I was 4 got my first road bike at 17. At the moment I have a deauville but first bike was a 1977 Honda XL125 with the orange tank. Sold in error, woman involved. Have chance to buy another one to renovte but it needs quite a few...
  19. 83 XL 125 help

    XL
    Hello My son has just bought an 85 XL 125 Whilst dooing the deal the seller said I have another 1983 XL 125 in bits in the shed, so I bought it as I wanted one 30 years ago. I now need help as the rear suspension is seized and been cut out! Looking for a parts diagram for it but cant find one as...
Top