Hi All, Although I've been a member for years I've never posted before as usually, thanks to the folks that do I usually find what I need...But!
I'm rebuilding my 94 A/T and despite taking pictures before disassembly I'm at a total loss as to where the smaller of the 2 side stand springs...
Transalp 1992 600 cowl& screen, dash, RH side panel, front bracket
More bits from my ‘naked’ TA project look at the pictures
Dash panel £6
Front bracket (bit bent see pics) £5
Cowl & standard size screen £25
RH side panel £25
(LH side panel was cut up for project but not used! )
So after 31,500 miles the headlight bulb dip filament gave up on my 650 the first thing that's ever gone wrong with the bike :D I found out when I switched on the ignition thirty five miles away from home in the pitch black :( and so the beam adjuster came in really handy as it let me lower the...
Due to demand I have put into production a new batch of riser kits comprising of from fork extensions with valves and rear U bracket. I have received several requests through Facebook etc and am having 10 sets produced. There are at least 5 sets available so if anyone interested to reserve a set...
Hi Everyone, I finally got my first XR400 last week and have clocked up a few miles on and off road already. Loving the bike and have already carried out a number of modifications but I'm struggling to find something.
The bike came with a K&N air filter on it, I bought a replacement foam filter...
Brackets for auxiliary fan are back in stock.
You can now run two fans. Ideal for sand and mud riding in hot climate.
You can spot weld them or use a special aluminum glue.
50$ cad a set. Includes bolts.
Only 20 sets available.
A mouse some how got into the left side fairing area and chewed up the entire CDI rubber mounting bracket and a few wires...beyond use now. I am trying to source this rubber bracket. Honda refers to it as -
CUSHION CDI UNIT
Product number: 30401MY1631
Item no: 1 shown in the...
Got my hands on a gratis Garmin Zumo 396LMT-S Motorcycle GPS, so decided to replace the TripMaster (which on mine was still fully functioning!)
Anyway, I used my 3D printer to make up a bracket to mount the Garmin on the original tripmaster mounts. I have the 3D models if anyone wants to...
So I just recently bought an AT RD07A, traded up from an older Transalp. I enjoyed the last few months of the season although I knew work needed to be done on her.
So new wheels bearing FandB, brake calipers overhauled, new chainset, new tyres and a well needed service all carried out.
It's been a while since I posted as I've had a difficult year emotionally etc, but alas, I have a question of an XR400 nature.
I sprayed my valve cover earlier in the year and renewed the copper washers on the rocker pivot bolts as I had an oil weep, and when refitting, I used a new...
After all the parts I have taken off and put back on I am stuck with this little bracket. I did put a label on it saying sprocket cover, but I can't see in any place it will fit. I'm pretty sure it's somewhere near the drive sprocket cover but as I've said ??
I've also looked at some different...
I have a couple of interested buyers on another forum but need 3 more to make a new batch.
Prices are as follows:-
Front pair of slugs £80 pair
Front slug valves £14 pair
Rear riser shock bracket £75 each
Recorded delivery within UK £3.95
European signed for delivery £14.95
I'm getting some pannier frames powder coated for my new CRF1000L so thought I'd give the RD03 back end a limited refurb.
Main aim it to stop the rot of the rear subframe.
Couple of non-standard plates on the rear rack for the GIVI top box and exhaust bracket need removal/replacement.
I have a brand new EBC brake caliper relocation bracket for sale, this will allow a 320mm disc to be fitted to the following bikes for Supermoto or street use.
The bracket is brand new, never fitted.
Fits the following bikes
Just changed both sprockets today but the front one (+1 tooth) is slacker on the shaft that the one i took off. As anyone will know who has changed a sprocket the bracket with two bolts to retain the sprocket has to align in the gap on the spline as they do not line up otherwise. Anyone suffered...
hopefully someone can help. I recently bought a hagon monoshock with the optional preload adjustor unit.
the problem I have now, is that there is about a foot of hydraulic hose with a big metal adjuster on the end. i have no clue as to where to mount it using the supplied bracket. I've...