Honda XRV Forum banner
build
1-19 of 77 Results
  1. Africa Twin
    Hello guys, I am Nikola from Bosnia and I am in the process of restoring old AT 650 and the job is nearly done so I've decided to share this with one of the biggest Africa Twin cummunities. For now I will share with you link to a Serbian moto-forum,BJBIKERS, where I post everything I do on my...
  2. XR
    Hello Chaps. I've just taken delivery of a tired 1985 XR350, which is currently fitted with a 250 motor complete with a race head! My challenge is to do a complete restoration on it and also find a 350 in one piece if possible, or I'll have to build one from scratch using new and second hand...
  3. Dominator / FMX
    I'm hoping to build a special dominator motor with a high compression piston - say 10.5:1 No problem I thought, as Wiseco do them for the XR650L - which is the same as the Dominator right? Does anyone know 100% for sure if this is true of all XR650L motors because the Wiseco catalogue does not...
  4. Africa Twin
    My first Post... I have just aquired an RD 03 vin # RD03 10004xx to keep my crf1000 dct company in the garage. It is 99% original but needs just a little care to make it excellent. Question.. Was this bike an early Japanese domestic build ? It does have a “speed” light and I think Japan...
  5. Transalp
    Hi i was just wondering if anyone knew what length chain i would put on my Re-build. I have put an AT swingers onto an 87 Transalp frame, I think the AT had a longer chain than the TA due to the longer swingarm but no sure about this combo...
  6. Dominator / FMX
    Looking to rder some chain and sprockets for my 2000 model nx650 build. Anyone know the difference between these two?? one says its an upgrade kit, but is less than £5 dearer?? https://www.mandp.co.uk/nx650-dominator-95-02-oe-did-c-s-kit.html...
  7. Dominator / FMX
    Right, im looking for some ideas to mount rear pegs on my dommie project. Would prefer them to be removable, as they will only be fitted if i take my son for a ride. See photo below. The only idea i could think of, is two weld two nuts on the inside of the curved upright, so i could then bolt...
  8. XL
    Hi Im doing a scrambler build using an 1982 XL 500 tank. Im just trying to find a petcock but struggling at the moment. The thread size looks to be 17mm x 1mm. Would anybody be able to advise where to get one from in the UK please? Many thanks Sam
  9. Africa Twin
    Hi All, I am trying to build up a new set of wheels for my RD07A so I have the old ones and a set of new. The reason being the old set will have road tires and the new set will have 50/50 tires on for an easy swap around when I want to hit the Bush down here in Melbourne and my new wheels will...
  10. Transalp
    Anyone looking for a centre stand for their TA, try Heavy Duties in Romania ( Heavy Duties) I have one on my 700, and the build quality is excellent, and only cost 84 euro, 600 & 650 80 euro.
  11. Africa Twin
    In a general search for motorcycle factory build videos found these for the CRF1000 AT, better than the Christmas edition of?? 2016 Honda Africa Twin CRF Production Line / Assembly Videos & Pictures - Go inside the Manufacturing Plant! | Honda-Pro Kevin
  12. Africa Twin
    my RD04 build blog https://www.facebook.com/Hondaxrv750africatwinrd04/
  13. How to.....
    Hi everyone,<br><br>Renewing camchains on 80k mile RD07, but I can't get sufficient slack to bolt cogs back on camshafts with chains in place. I need an extra 10mm upward movement for things to match up.<br><br>What am I doing wrong? Is there some way of adjusting tensioners to build more slack...
  14. Transalp
    For my Pyrenees ride this year I've given the beast a good makeover.
  15. XRV Swap Shop
    FOR Sale FCR Pumper carb 40mm I bought this carb for my new build however after offering it up it became clear it will not fit due to the altered frame loop This carb is rejetted with the correct needle jet(nctv 2nd ring down). These jets and needle jets came to £40 on there own and have never...
  16. XL
    Hey all! This is my first post.I recently bought an'82 XL250R(MD03)which has seen better days.My intention is to do a scrambler type build with it so want to get rid of the airbox and battery.Can anyone tell me if the bike will start and run without a battery? Or could I use a "battery...
  17. Other Honda
    Hi all I'm in the process of planning an SLR650 scrambler build & am looking for some short levers. Would anyone happen to know if the front brake & clutch levers are the same on a Dominator? If not, would the be the same on anything else? Africa twin perhaps or any suggestions on where to get...
  18. Bikes For Sale / Wanted
    Looking to buy any of the above in any condition at all to build another project bike.....will pay cash and can collect.
  19. Dominator / FMX
    Looking for some help, I've taken off swing arm and linkage + rear shock, all nicely painted and putting it back together now. Issue I have is it seems the bike has shrunk or the shock has grown - I'm about 2in out at the bottom. Original shock and parts all being reused. Anyone know what...
1-19 of 77 Results
Top