Search Results for ‘bulb’

Hi all, If anybody has bought the indicators from rugged roads could you please tell me what bulb it uses, If it has the foam seal inside like the oem does ? And is the lens the same as the oem? If you could upload a photo of the rugged roads lens & bulb it would be great :) Here is one...

Has anyone found a replacement for the Stanley 12v 21/5v (#34906-MBB-611) tail light bulb? I've been searching Amazon, eBay, AliExpress and Google with no luck. You can find single filament bulb replacements but the two filaments don't seem to exist. Thanks- Harry

Hi, my newly bought RD07a has aftermarket indicators on it and they flsh quickly like normal one would if a bulb was out. Is there some way I can get around this withutnhaving tomsource some originals?

One of my bulbs just was black inside, so I decide to replace both bulbs, but to something good and led :) I decide NOT to buy some cheap china crap, and was ready to pay. I make small issue, and found two companies Osram and Philips. Philips was better, but I didn't found this bulbs on ebay...

On my last AT I had a volt meter that I bought from ebay that was basically a bulb in a rubber shroud that changed colour depending on the voltage. it was the perfect size to fill the space in the dash box that houses the lights for oil, neutral, highbeam, and indicaters. I have spent the...

Just a quick question i have fitted my LED indicators ,i have gone through the hazzard warning light syndrome ,bought a LED compatable flaher relay ,to find the indicators only work when i remove the dash light (indicator),so i bought a small t5 LED bulb for the dash display now the dash...

I stupidly ordered a Cyclops H4 LED bulb (with rectifier/regulator) for my US model XR400 headlight and of course I can't mount it in the stock light assembly. Is there another XR headlight assembly (AU version?) that will accept H4 bulbs or an aftermarket option? Thanks! Here's the bulb...

Hi guys, New to the forum and hoping it will be very useful. I have a 1978 XL250 with an electrical issue i cant work out. My neutral light and horn will only work when the brake light is on. Also the back light isnt working at all. I have changed the rear bulb and checked the inline fuse...

Hi All, I would like to replace the single-filament incandescent tail-light bulb in my Africa Twin with an LED panel. Does anyone have any experience of this one from Moto-Discovery in Greece ? https://moto-discovery.com/eshop/tail-lights-lenses/led-panel-for-africa-twin-tail-light.html I...

whilst backing June down a dark alley, i noticed the front brake light wasn't working. i replaced the switch with 2 new, & 1 off Dumbo, switched wires too. With the lights on & off, results - fully lit rear bulb then no lights when the lever is pulled in. Anyone have any ideas, before...

Thought i would stick a couple of pictures up of the rear light unit i fitted during summer months for the darker nights, or if either bulb blows ? as a back up...£4-50p incl post ebay, from China....very effective safegaurd from nasties happening from the rear.... lights up the...

I bought a voltometer for my old at a few years ago and want to buy another one for my new bike. the old one was just a bulb and it showed green when good and flashed different colours, amber and red depending on the state of the charging circuit see image, i put it in the bottom left of the...

Bike 650 trannie.Headlight bulb replaced,now HISS light stays on all the time with ignition on.Flicking the kill switch on off makes no difference.Will crank over till doomsday with no results.Fiddled around with wireing under the clocks but no luck,What have i displaced.Any suggestions...

Don't know what it is about the RD07A but every simple maintenance job turns into a frikkin nightmare! Trying to replace my headlight bulbs but the wiring connector won't come away from the 3 pins. Got to what I consider a safe level of brute force trying to pull them off given the bits of...

Happy New Year everyone Just a quicky ive ordered a new headlight bulb is ita job to fit with big hands or can i get in ok .ive not even tried yet Thanks 700 va9 Neil

Dip beam on the right head lamp has failed. main is ok and both filaments on the left are fine. is a bulb change as simple as pop the screen off, undo four bolts and remove the front fairing, or is it remove the side panel and dislocate your wrist to do it? Mr Haynes is blody useless o this...

Hi Folks, I know this has been covered but I'd like to get a whiter bulb for my headlight but I can't seem to find one thats dip and main in one bulb. I may just be looking in the wrong places but just wondered if anyone knew of any. Thanks.:)

Hi, I took the TA to work today, it was pretty glum, raining a bit and seemed to sap any power from my lights. I was wondering if there is an upgrade bulb to shed a bit more light on my journey. Also thinking of some extra lights but I don't want to look like one of those look at me twonks...