Honda XRV Forum banner

cables

  1. Best supplier for good spares.

    Transalp
    Evening all, recently joined the forum after buying myself a ‘93 Transalp. It needs very little doing to it but I’d like to plan some repairs and basics. So, been asked before no doubt, but what’s the best source for buying spares and consumable, cables, electric parts, bearings etc. First off...
  2. Sticky Throttle Cables

    Transalp
    Hi all, New to the forum so go easy on me... Just after some advice. I'm attempting to put some oil on my throttle cables but the cables are super tight and I'm struggling to release them. What am i missing? I have a 700. Cheers
  3. extra long throttle cable

    Africa Twin
    I have 25mm handlebar risers on my @ and have just fitted starbars. Thing is, the bars are a tad longer than standard bars and on full lock the engine revs due to the length of the throttle cables not being enough. I like the new bars and also like the risers, so is there a longer throttle cable...
  4. Starting issues

    Africa Twin
    My RD07A have started to behave strange when it is cold. It starts with full choke but dies after a while. I can start it again but slowly dies. If I add throttle it dies at once. When the engine gets warm there is no problem only when cold. It can take 15 min struggling wit hstart gas and...
  5. RD07 Handlebar risers

    Africa Twin
    Hi! I know there is a thread somewhere but i couldn't find it. Which is the maximum height of risers one can add without changing all the cables? And can someone recommend me some? Thanks in advance
  6. Very strange behaviour..

    Africa Twin
    This is a strange one... When I start the bike on the side stand and use choke the bike idols around 1200rpm, BUT if i lean the Bike over untill it’s level then the revs climb to 2500-3000rpm. This only happens with the choke on. when I’m moving the bike on or off the side stand the handle...
  7. question about the SWmotech crashbars.

    Varadero
    How much of the bike did you have to disassemble to mount the 2 parts (one on each side of the bike) shown in the picture here? I took all the plastic of the bike but did not have any room to mount the due to a lot of cables and what I think is the engine cooler (don't know I its correct in...
  8. HeavyDuties 60mm risers with FatBars ?

    Africa Twin
    Hi all, Has anybody fitted the "HeavyDuties" 60mm bar risers with Renthal FatBars ? I have HEL brake lines so they should be fine but what about speedo, clutch & throttle cables ? Bike is an RD03 and front end is stock apart from the brake lines. Traveling The World Two Up on a 1989...
  9. SLR and FX Throttle Cables NOS!

    Dominator / FMX
    My local bike shop has a contact who has access to Honda NOS parts. He's now stocking throttle cables and speedo drive gears for SLR and FX650 - both discontinued by Honda. Get 'em while they're hot! Manhattan Motorcycles Ltd. Recently Added Products
  10. For Sale: XR 600R 1985-87 twin carburettors

    For Sale / Wanted
    TWIN CARBS IN GREAT CONDITION WITH CABLES AND THROTTLE INCLUDED , ALSO FRONT BRAKE MASTER CYLINDER sensible offers please
  11. Wanted: 1987 XL600LMF Right hand side panel

    For Sale / Wanted
    I am looking for the right hand number board/seat side panel for a 1987 XL600 LMF. Its the model with the three slots by the number board section. Condition not to important as I can repair most things. Also any info on useful sites to get cables and small service items from as I am restoring...
  12. installing led lights on @ rd07 -97

    How to.....
    Hello. Trying to install led lights. I've tried with a few different led relays. The closest I get is to have one side working as it should and other side makes hazard lights. Same effect on all relays but blink speed varies. I can switch the cables to make both left and right function so its...
  13. For Sale: 1980s XL250 Parts

    For Sale / Wanted
    I hope this is OK to list here but i have a lot of 1984/85 XL250 USED parts for sale. There are too many to list here but i have many engine parts from complete engines to barrels, heads, crankcase covers, clutch and gearbox parts, electrics, carbs, cables plus many more parts. Let me know if...
  14. Throttle sticking at the carbs

    Transalp
    94 Transalp. Been stood a while and prepping her for winter abuse. Thought it was cables so popped throttle off but even with the cables loose it still stuck on full - after a tug on the return it snaps back. I've oiled the cables plenty - there was oil drippping out at the carb end so it got...
  15. For Sale: a line on customisable shrouded cables for securing items to bikes

    For Sale / Wanted
    Hola, A friend of mine, based in Lithuania, has a line on steel cables that can be used to secure items to bikes. As far as I know, thickness can be 2, 3 4 or 6mm (possibly also other thicknesses) and the length is customisable. There'd be a loop at either end and it'd be shrouded in 2mm...
  16. Keihun 41mm flatside.

    Dominator / FMX
    I am selling my flatside if anyone is interested. I have re-jetted and fitted the required needle for the Dommie mod. Nick in Brum cleaned it and set it up for me but I dont want to fit it on my Dommie and it would be a shame to just throw it in the spares box. PM me if you are interested. The...
  17. For Sale: XRV750 MOSFET Reg/Rec (Voltage Regulator/Rectifier)

    For Sale / Wanted
    Purchased in error! Brand new Shindengen FH012AA MOSFET Reg/Rec In line splash proof maxi-fuse holder & 30A fuse 10AWG black/red cables to go to battery 12AWG yellow cables to go to alternator And all crimps to suit (or use your own connectors or soldered joints as you wish) (NB: Crimped...
  18. Sorted, cheers for advice

    Africa Twin
    I posted a few days back about seized chokes and starting my RD04 with easy start. Started no problem, got it to work, stripped off the tank and panels and as I fiddled about the chokes freed; typical, but I took them to bits, fitted new cables and everyting is hunky dory, a typical AT job, faff...
  19. Throttle wont 'snap' back after new grips - HELP !

    Transalp
    Oh lordy, why did I even bother...... Fitted the heated grips, and used hairspray as glue as usual, all good. Came back to garage after a couple of hours, noticed the throttle grip had not set (other side great), So, pulled grip off only to find the throttle 'sheath' now wont snap back! It...
  20. Slinky Cables

    Product Reviews
    Heads up regarding Slinky Cables currently being touted by Wemoto. I bought a replacement throttle cable (pull) for my XL600R. It's 50mm too short compared to the standard Honda item which is now out of stock. I don't know if all these cables come up short or even if this is a one off but do...
Top