Honda XRV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 231 Results
  1. Transalp
    My "front-end" saga continues with the discovery of seized brake caliper pistons and brittle caliper piston seals (that have been in there since 2001) Having never done this before.....Is this piston good for re-use? It seems to slide in and out of the bore ok, but looks a bit pitted/scored?
  2. Africa Twin
    How much, all in would a set of USD forks cost, inc wheel, disc caliper etc off a KTM640 supermoto/enduro and everything I need to fit it to my bike (RD04) and what could I get for my original forks, etc? Basically swap out the whole front end - labour aside - wopuld I break even?
  3. Dominator / FMX
    I just made myself one of these sleeves out of stainless steel for the rear caliper on a 96 RD08 (part No14 in the link below) hoping i'll never have to replace it again. Its a cheep enough part but i wanted an excuse to use the grooving tool i bought :D I made two so have one spare if anyone is...
  4. Member Classifieds
    Having a bit of a clear out and the following are up for sale, RD03 rear pegs, rear brake disc guard, lights, rear caliper holders. Rocker covers from an RD07 but I think are the same for RD04. Exhaust guard is provisionally sold. Open to offers.....Also have quite a few front and rear sprockets...
  5. Dominator / FMX
    Help please! I've set myself the task of replacing my rear brake pads but I've fallen at the first hurdle. I can't for the life of me see how to get the pad retaining pin out. I can't see any threads / hex heads like on my other bikes. I can just about see a tiny hole where I guess an r-clip...
  6. Member Classifieds
    Rear brake caliper including brake hose and master cylinder. Basically the complete rear brake assembly except the brake pedal. Condition unknown but everything looks to be in good order. Photos available on request. Asking 50€ for the kit. Located in Sweden. Shipping, including tracking and...
  7. Member Classifieds
    Part number is 45210-MY1-006 or 45210-MAY-006 for XRV750 1999. I believe the same part is on the Transalps. This is the black plate that mounts the Left caliper to the fork leg. Like a complete idiot, I rode off with my disc lock still on, which broke the lower part of the plate when it made...
  8. Transalp
    Hi again, Wondering is anyone could guide me on this: I need a new caliper (the one on the right at the front). Can you still get a new one and or do I need to get a used one? If I get a used one, is this part specific to this model Transalp or can I search other (perhaps) more common bikes...
  9. Dominator / FMX
    Hi, folks, this is a two-parter part 1 i am in need of a front calliper for my new dommie project has anyone got one for sale or trade? part 2 is there a choice of calipers i can work with? i had a slr front caliper on one of my dommies , is there a further choice that you know of? i seem to...
  10. Member Classifieds
    WANTED supermoto 17" wheels for XR650R spacers and caliper brackets would also be usefull Regards Dan:thumbup:
  11. Bikes For Sale / Wanted
    WANTED supermoto 17" wheels for XR650R spacers and caliper brackets would also be usefull Regards Dan:thumbup:
  12. Africa Twin
    I have a crf 250 r front end complete wheel too i do need a caliper and m/cylinder but i am toying with the idea of an upgrade .I will wait until i have at least ridden my AT (which i have yet to do )but if any one has actual experience in this conversion i would be interested in hearing how it...
  13. Member Classifieds
    I have a brand new EBC brake caliper relocation bracket for sale, this will allow a 320mm disc to be fitted to the following bikes for Supermoto or street use. The bracket is brand new, never fitted. Anodised blue. Fits the following bikes Honda CR125R 95-03 CR250R 95-03 CR500R 95-03 CRF150F...
  14. Member Classifieds
    Hello, I am after a '99 rear brake bracket that the brembo caliper slides on as I have bent mine after beating it with a hammer in anger as the little bugger wouldn't separate! Brakes are binding a bit now as the caliper doesn't slide like it should. If anyone has a spare one lying around then...
  15. Member Classifieds
    Hi, I'm in need of a front right brake caliper for AT RD07. Don't even need the pistons or bolts, just the "body" thanks
  16. Dominator / FMX
    Hi everybody! After finally getting the right brake pads for my rear caliper I have since "finished" my scrambler in working order. However I still need to fit some gauges and I'd like to take a look at the pin-out or schematics for the original dash before tackling this job :) I would greatly...
  17. Africa Twin
    Has anyone gone down to a single disc on their rd04 using standard lever and master cylinder a braided hose and single standard caliper? Apart from the impact on braking will this work?
  18. Dominator / FMX
    So I went to see just how deep the rabbit hole goes and completely tore my dommie apart for a restoration. I'm currently rebuilding it, and I've changed the pads on the rear, but there is only a pin to secure them on one end, which means that the pads won't stay in the caliper! What am I...
  19. Africa Twin Technical Specs
    Hola. I hope this isn't too much of a newbie question but... I had a bit of a weird rattle coming from the front end whilst braking on cobble and, on checking, one of my caliper bolts (on my RD04) has gone AWOL So, my first question - It's these things right? OEM Honda Flange Bolt 8X40...
  20. Dominator / FMX
    Hi Guys, I have replaced the rear piston and seals on my Nissan caliper. I cant get the dam thing to work now. I have tried to bleed but it wont seem to? Any tips??
1-20 of 231 Results
Top