So I just bought my first "proper" bike. 1998 AT RD07 with 44,000km on the clock. It's pretty mint and seems well maintained. Fires up immediately, idles good, pulls good, no dramas.
Just that the vibrations are horrible above 4500rpm. On the highway I do not exceed 80kph for any length of...
I’m building a scrambler / flat tracker from my FMX 650.
My standard carb has two sets of electrical connections on it. What are these electrical connections for, what do they do???
I have a Keihen FCR flatslide carb to go on the bike when I’m finished the build but this carb doesn’t...
I have a XRV RD04 1991.
Reading all service manuals and visiting all websites in the world, don't clarify which needle jet holder goes where. One have 6 holes - one have 10 holes.
My logic tells me, that the one with 10 holes is in carburettor 1, since its jetted a little larger than...
i have bought a xl185s 1980 but am unsure if it has the correct carb on it, some of the fittings dont match the ones in my book? where do i find the part number or how do i tell if it is the correct one?
Hi there, I have an a 1982 xl500s trail bike. Engine has just been rebuilt - starts ok but runs erratically at low revs and gets very hot. It has had new valves, new air cut off valve in carburettor. No air leaks that I can see, carb has been cleaned, jets etc. Running out of ideas, any...
I have acquired a Honda CL400 and very pleased with it so far.
There is hardly any info available on the web so at the moment I have no manual or even a handbook.
The engine is apparently the same as that in a XR400 (or KR400?) so I should be able to service the engine OK.
- but the...
I have had a major issue with an XL500R and wonder if anyone can help with info.
Trying to start it, the bike backfired and has blown the plastic top off the Keihin Carb. When I look closely I can see that the slider has jammed right at the top of the carb also which means the throttle...
Greetings Pommie Dommies from sunny 'Stralia, you must be getting excited at summer biking weather in the offing soon eh!:cool:
Have been lurking on here for a while now, lots of good info and a great community, which has helped me in the process of tidying up an old red Dommie, must be old cos...
hi all i have a problem...my carburettor diaphragm has split and honda uk say they are know longer available for the nx650 dominator...not what i wanted to here..any idea where i may locate one or can i fit another carb ...thank you in advance for your help mal.
I have a strange problem. I was driving the bike in the City, stopped for 10 minutes and after then when I started the engine I realized only on cylinder is working. Took off the rear cylinder's spark cap, there was spark beetwen the engine and the cap, so it must be some kind of fuel problem...
These..bought in error..only out the box for pics..£17 posted.
Honda XRV 750 T/V/W RD07 Africa Twin 96-98 Carburettor to Engine Inlet Rubbers Parts at Wemoto - The UK's No.1 On-Line Motorcycle Parts Retailer
I have discovered that the snorkel on my new purchase xrv650 has had a repair in the past around the underside where one of the carburettor hoses attaches. Seems to have been repaired with grey siicon. Wondering if I should repair the repair or source replacement part?? Any idea?
Hi... this may be of interest to some:
Reduced prices for Facet pumps.
Red Top, Silver Top & Solid State Fuel Pumps
I don't know if any of the pumps on offer will be suitable for the @, but it may be worth a punt!