Honda XRV Forum banner

case

  1. Dominator / FMX
    I bought a XR650R (thicker) 15T front sprocket, then I found out that on my FMX front sprocket is 14T. Which is original? 14T or 15T? BTW I found on the INTERNET that people are fitting XR650R front sprocket on XR650L to prevent it from cutting into sprocket splines. Please note that XR650L and...
  2. MOTORCYCLEiD
    Shark Helmets is one of the leading manufacturers of motorcycle helmets in the world with four decades of experience in the field. The company was established by former professional racers who wanted to create safer, better gear for all riders to enjoy their biking experience while staying...
  3. Africa Twin
    In case anybody is interested https://www.motorrad-magazin.at/motorrad-magazin.at/artikel/1/85/3931/Honda+Africa+Twin+2020:+Mehr+Power,+Kurven-ABS,+TFT-Touchscreen+?fbclid=IwAR0Pi1HQcXnkOO74R_gvfdh77ASADOH3wqL0i-u2Gi5p9x3JQhfmuJ34_yo
  4. Transalp
    Hello, i notice one of my grommet's is missing and I would like to replace it Looking at the Honda diagrams they seem to be coming up as Air Cleaner Case Grommet's and the part nr is 83551-300-000 Can anyone confirm ta Rod
  5. XR
    Just in case anyone else in the UK needs one of these parts and does not want to pay the stupid price of £32 :disgust: ........ (these are only $15 in the states) I just made & fitted today, seems OK. Cost me about £2 & 1/2hr effort. (I bought a 25mm thick hard rubber dapping block on eBay)
  6. XR
    Hi, ..... I am looking for a bit of clarification please re: my new drive sprocket. The Honda manual (& YouTube vids) all state ..... install with the tooth number stamped on the socket, facing out. (this was the case on the one I just took out) But the new Renthal sprocket I have, appears...
  7. Transalp
    I'd like to experiment with a modification to the rear brake lever of my XL700 Transalp but want to keep my original lever in case it goes horribly wrong! Are the splines the same across the different Transalp models (or any other Hondas)? This would open up the choice of spare parts/price...
  8. Africa Twin Technical Specs
    I have a year 2000 RD 07a that has a hairline fissure in the engine case. I am looking for an engine. I just wondered why the engine code states rd04 while the frame is RD07. Are the crank cases the same on both models? Richtwin
  9. XL
    Hi All I've just got myself a 76 XL250 that im hoping to restore, I need a large amount of parts, I understand there's a company over here that is good but is there a main place in the states or is it just a case of looking around ? Thanks in advance Simon
  10. Africa Twin
    Hi all, Greeting from the west coast of the US. I have been lucky enough to import a 1997 TA. The motor was blown and I'm starting the rebuild process. I need to press the crank shells out of the case and I was wondering what people are using or any tricks. I was planning on turning a pressing...
  11. Dominator / FMX
    In case you dont look in the For sale section very often ? Breaking a very low miles 1 owner Dominator , all Red Plastics , rims etc for sale ... see for sale section on her;)e ..
  12. I'd like to introduce myself....................
    Hey everyone I currently have a 2007 xr250L ,can anyone please help me with the stupid pipe work that comes off the carby ,that carby is so hard to find a pic of anywhere. it has a black plastic male connection coming off the left hand side near top for one of the suction or pressurized...
  13. Africa Twin
    Hi Im going through the motions to try and start my 750 AT motor. Its been sitting about 6 yrs some of the time with no oil. It turns over by hand no probs but i pulled the dipstick out to check the oil level after cranking it over with a battery and it was under pressure, lots of air came out...
  14. XR Technical Specs
    Getting Close-ish to a finished XR250.... but I'm stuck.... Okay, so I have followed the manual & I can't seem to figure it out. You hold the cam lifter lever down & it will sit in the correct position (so that it can be actuated by the kick start & not sitting against the wall) I put the...
  15. Transalp
    I’m working down in Dorset and thinking of hiring a van to collect my bike one weekend, rather than spend 6 hours on the train and then 5 hours back mostly on motorways. It also means I can bring another suitcase of bits and pieces with me, I work at sea so spend months away at a time. Can I...
  16. XR
    Hi guys I went riding on sunday, only for an hour or so, and this was after I had been out for a similar amount only a couple of weeks earlier. Before I went out a couple of weeks ago, I checked my oil level and it was great, so didn't think to check it this week. (I've had the bike 3.5 years...
  17. For Sale / Wanted
    As title, I have a front wheel from an RD03 and lose forks all in good condition. Was going to keep them 'just n case' but need to have a clear out... Message me if any interest. £100 for front wheel and disc and £80 for forks. Collection from Huntingdon, Cambridgeshire
  18. Africa Twin
    Evening all, I’ve recently observed some strange behaviour on my old lady (RD03 AT with RD04 motor): After I’ve got her back from receiving some routine service incl. carb cleaning and a new choke cable she tends to stall when breaking somewhat stronger whilst simultaneously pulling the...
  19. Africa Twin
    Hi, failed the MOT yesterday :cry: due to uneven braking at the front. I can feel that the braking is uneven (as you apply slight pressure to come to a stop it feels like the disc is warped) but didn't really feel it was an issue. The MOT man did... So...what to do? I removed both discs and...
  20. Africa Twin
    So, I have a (cheap knock-off) Peli style box just sitting there unused in the shed - quite big, enough to probably fit 2 helmets in, possibly. Was intended for dSLR & lenses in boot of car etc., but using something else (a smaller, actual deli case) instead. So, was thinking of bolting it on...
Top