Honda XRV Forum banner

chain

  1. Replacing Sprocket and Chain

    Transalp
    Hi all, Sorry for newbie question, but this is my first bike so my first sprocket and chain change! Its on my 1989 XL600V and I just have a couple of Qs: 1. Can anyone recommend where I should get them from? Cant seem to find one on David Silver 2. Do I replace the front and back sprockets? Or...
  2. Oil Pressure and clutch Question

    Transalp
    I’m on changing the output shaft on my 700 XL and having started it up after the rebuild I am getting a very light noise from the clutch side, my question is there anything that is peculiar to the clutch to make it noisy. When I pull in the clutch lever the noise disappears. , there is also a...
  3. 520 chain and sprockets on XRV750 RD07a

    I'd like to introduce myself....................
    Hi everybody, I am new to this forum. Just bought an XRV750rd07a full stock that I am planning to rebuild to a lighter and more offroad capable travel bike. One of the ideas is to install Supersprox sprocket and 520 pitch chain to reduce weight. Anyone any advice or experience having done this.
  4. For Sale: Transalp XL700VA-9 For Sale

    Bikes For Sale / Wanted
    SOLD Okay, it's a tough decision as I love my Transalp and she's NEVER let me down but I want an Africa Twin and as I can't afford two bikes then she has to go! So for sale is my trusty Honda Transalp. This has been my trusty commuter to work and has NEVER let me down. The only time I've had...
  5. Chain slider (lower front) on XRV650

    Africa Twin
    I'm looking for some help on the mounting of the chain slider. I've been working on a restoration and it has been some time since I've been at it due to health reasons. When I went to put the slider on, the mounting point does not seem to be right. I'm wondering if one of the points has been...
  6. JT chain

    Transalp
    Probably going to need new chain and sprockets this year and just wondering if anyone has tried this JT -...
  7. For Sale: XR400

    Bikes For Sale / Wanted
    Hi there As mentioned a few months ago in the XR segment of this forum, I am offering up first dibs on my XR400 to you guys. As I now have osteo arthritis in my right foot, kickstarting has lost its appeal somewhat, mostly as it sometimes hurts, anyway. It is a 1996, P reg. Mileage unknown...
  8. RD07 GFK rear tank fuel line

    Africa Twin
    Greeting from Austria! Since i saw many Twins with rear tanks in this forum, i got to ask you a few questions. Short story: I bought a modified RD07 1995 last year which needed some love, stripped it this winter, removed everything the previous owner built, checked and overhauled pretty much...
  9. Proud new owner XL1000 V5

    Varadero
    So just bought it its silver/black 2005 abs 22k on it,i have fitted a new front tyre(metzler tourance) have bought a new chain and sprockets and my question is,does anyone know the correct torque settings for the front sprocket and the nuts for the rear sprocket,i live in londonderry n.ireland...
  10. Swap: 2015 ktm duke 200 with dyna boost chip (unfitted)

    Bikes For Sale / Wanted
    Hi, I am looking for a early 80s xr200r rolling chassis or full bike to direct swap for my duke, only bought the duke as couldlnt find the xr i wanted, duke sounds nuts and looks pretty radical with a rat look paint job and after market parts, needsa few tghings for first mot in october, just...
  11. TA650 Chain install problems

    Transalp
    Hi all I've been riding my trusty Transalp daily now for 12 months. It was time for a new Chain and Sprocket set. I removed everything that was required and gave it all a good clean. Fitted both Sprockets then re-assembled with the new chain. Had some problems with riveting the master link as...
  12. Transalp Rebuild.. What to replace?

    Transalp
    Hi All, Yesterday I stripped my bike down to give it a freshen up, below is a list of jobs i'm planning to do, is there anything obvious i've missed? I'm hoping to have the bike back together and running in 3 weeks time for MMM at Haggs bank. I'm going to prioritise the engine as that's the...
  13. New slipper chain - DIY job

    XR
    Just in case anyone else in the UK needs one of these parts and does not want to pay the stupid price of £32 :disgust: ........ (these are only $15 in the states) I just made & fitted today, seems OK. Cost me about £2 & 1/2hr effort. (I bought a 25mm thick hard rubber dapping block on eBay)
  14. 650 review

    Transalp
    From here (2004 - he's in Australia, I think) https://advrider.com/f/threads/living-with-the-honda-transalp-650-now-3-000ks.56814/ ------------------------------ Now that the dust has settled on the new 650 Tranny, these are my observations and experiences thus far. The engine is feeling...
  15. Swingarm adjuster snapped

    Mechanical Advice
    Hi all, (newbie) , just done a post on the crf page but think posting here may get more response, iv recently purchesed a 2014 crf 450r, on adjusting the chain I found a seized adjuster and yes like a t**t I snapped it trying to undo, iv tried several metal drill bits to drill out without...
  16. Crf swingarm adjuster

    CRF - New Forum!
    Hi all, iv recently purchesed a 2014 crf 450r, on adjusting the chain I found a seized adjuster and yes like a t**t I snapped it trying to undo, iv tried several metal drill bits to drill out without success, my question is can anyone recommend a drill bit that will get through the snapped...
  17. Varadero & the addiction to modifying

    Varadero
    I feel that yesterday's Vtr shock fitment was the final chapter to project "Varastorm". Here's a list of modifications that I've done to my trackday Varadero :) I'm a bit shocked with the amount of things that I've done to it over the years, but here they all are in one thread, Engine...
  18. Front exhaust valve too tight to callibrate.

    Africa Twin
    Hello, Balam from Mexico here. I have undertaken the task of calibrating my valves. All went well with rear cylinder, but my front cylinder has a problem. Intakes valves are good. Exhaust valve is waaaaay too tight. I can get no feeler gauge in! What's going on? Is my timing chain off? Is the...
  19. 600 Alp No 2 - Oily Rag Refurb in photo's

    Transalp
    Photos of my Alps strip down, clean, oily rag refurb & rebuild . . . Before . . . . on the day of purchase actually Don't you just luv a nice clean rim? :rolleyes: 10k / 20 years miles of chain crud Front end work commences Front end rebuild in progress Heavy Duty crash...
  20. 700 ABS Bleeding/New Brake Fluid linked brakes help!

    Transalp
    Hi, I am a new forum member, in London, have been lurking for a while and getting a lot out of this great site/forum. I got my 2011 700XLVA a few months ago and have just started doing some servicing. The bike has 16,000 miles on it now, loving it so far, so much more comfortable and...
Top