Help please! I've set myself the task of replacing my rear brake pads but I've fallen at the first hurdle.
I can't for the life of me see how to get the pad retaining pin out. I can't see any threads / hex heads like on my other bikes. I can just about see a tiny hole where I guess an r-clip...
Hi guys, a quick one. I've been trying to resolve my XRs fueling problem for a while now. It's main issue is that it conks out. If I rev it and let the throttle snap back, it tends to simply die. Whereas if I gently roll off, it stays running. I'm running #168 main and #62 pilot jets, clip...
My clutch cable snapped last week (luckily once I was home and parked) and I just swapped it out the other day. It took me longer than expected to free the old cable, purely because there was a little cable clip on the rear of the main upright. Difficult to see or feel, but once I had...
I'm having trouble removing the inner speedo cable on my AT. It broke about 30cm from the top and I am trying to push the old one up from the hub end and it doesn't budge. I've been somewhat forceful and no go. it spins however. Also worth noting that I have spayed a bunch of WD40 in the casing...
Seen a TV trailer for MacGyver and he is landing a small jump on a motorbike
It's a very short clip and out of focus
Can't make my mind up on what it is, early TA painted up as an AT, an AT, or an NX350
Has a square headlight, painted in RD03 type AT colours
Anyone used these? With the cylinder head locating tab in the correct postion they don't seem to allow the clamp/clip with the tab to line up properly. It ends up fouling on the valve cover and slanting diagonally across the rubber. There are two different clamps and I have them installed the...
I'm quiet keen to change out some of the bulbs on my old XL 250, to LEDs, so have any of you guys and girls had any success with this?, I'm thinking I may have to make the LED clusters my self from scratch, the only light I will not mess with is the Head light, though I did see a You Tube clip...
It's that pipe question again.
This time showing the view from the front/top of the TA XL650v engine, where the pipes come outta the carb bodies and join The Mystery.
As there's a spring clip on the open end, I assume the pipe should be attached to something ... ?
Hi, finally got round to editing the footage from last April when we were riding in the forests of Gueret (Central France).
The trails are amazing, so much variation in the terrain and hill climbs etc. Just a short clip!
Enjoy! Trail riding France
Ages back somebody posted a link to a you tube clip of somebody going proper bonkers off road on an AT, big jumps etc.
I am trying to persuade a mate to buy one and this might help.
Browsed all over youtube with no success.
Anybody got an idea?
Had a third look and found it...
I'm trying to unclip the fuse box that's next to the coolant reservoir so i can see the wiring to the clock fuse, i can't see or feel how its attached to the bracket. Can anyone remember how to unclip it. Its an RD07A
Don't think this was posted before.
Was trawling the old Youtube and came across this.
EXTREME AFRICA TWIN 750 XRV OFF ROAD IN CORSICA PART 1 - YouTube
Some good riding skills there :thumbright::thumbright:
Gone over to the dark side after years of straight back riding, although the VFR is slightly more relaxed than other still would like to be
a tad straighter on the bike, Does anyone have experiences of risers for clip on's, Have seen LSL kits which convert to bars ??
Will used kits from...