Honda XRV Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-18 of 152 Results
  1. CRF - New Forum!
    Does anyone know what the affects of the tps wiring being snapped would have on the running of a crf 450x 2005 :confused::confused::confused::confused::confused:
  2. Dominator / FMX
    After doing a bit of research, and removing the actual bearings im a little confused. Found on forums that linkage bearings were TA1720Z (O.D 24mm, I'D 17mm, Width 20mm) The ones i removed from bike were BM172417-1 (O.D 24mm, I.D 17mm, Width 17mm) Any idea which is the correct bearing to go...
  3. Dominator / FMX
    When i bought my 89 nx i noticed the idle screw cable was snapped off at the carb, the tosser i bought it off assured me he had a spare and would send it on. Well he didn't and i have no way of adjusting as the cable has snapped tight up to the point of entry, CSNL have none nor D S. does anyone...
  4. Dominator / FMX
    Hi All, Complete new Dominator owner here so bear with me. So I thought I'd check the oil today but ended up a little confused. The dipstick has a thermometer on it as you can see from the attached pics. But it doesn't have any markings on the stick to say high or low oil level. So any...
  5. Africa Twin
    Hi all, Seem to have another itch to scratch - Wanted to spray my screen on my AT - cant decide red or black? What do you think???????:confused:
  6. Africa Twin
    Wondering if there is a definitive answer to the heated grips issues on the new AT - Has anyone had these fixed, replaced, or some compensation? :confused: I am hearing all kinds of odd stories: Some say they got a refund, others say Honda are not going to do anything :( I'm confused......
  7. Dominator / FMX
    Looking for some help, I've taken off swing arm and linkage + rear shock, all nicely painted and putting it back together now. Issue I have is it seems the bike has shrunk or the shock has grown - I'm about 2in out at the bottom. Original shock and parts all being reused. Anyone know what...
  8. Africa Twin
    I have been offered an Arrow can (part number 72005PD),i have a RD07a and i am getting a bit confused as to if it will fit as looking at the pics of an RD07a one it looks slightly different,(no small heat shield and straight link pipe) as the one offered has the small heat shield and a more...
  9. Africa Twin
    Most of Henrietta is now back where it should be and looking tidy. Under the tank is just the fuel pipe to the pump but the parts diagram seems to show other hoses (parts 45, 46 & 48). there seem to be 2 short pipes under the tank (nr the fuel tap), one is 10.5mm and the other 5.5mm. Does anyone...
  10. Africa Twin
    Is this a known issue with the AT? Noticed a puddle on my garage floor, been dreading finding out the cause but it just seems to be the rubber gasket. From what I can see it looks fine though and I'm confused as to why a fairly durable looking gasket could just fail suddenly. Best pic I...
  11. Africa Twin
    Need some new rubber, currently running Tourance with tubes Rang around for some quotes and am being told that you can only get the 90/90/21 for tubed application now, and the 140/80/17 needs to be tubeless? I'm confused - can I still run a tube in a tubeless rear Tourance? Thanks.............Sam
  12. Africa Twin
    HONDA VARADERO 750CC AFRICA TWIN ENGINE ( M.O.D IMPORTS FROM CYPRUS | eBay someones confused me thinks:rolleyes:
  13. For Sale / Wanted
    Think I may require a clutch basket for my 98 Africa Twin,does anybody have one lying at the back of their shed ?? :confused: Will buy the whole assembly if need be. Mine is making a helluva racket, having getting me home from Ireland last week. Cash or Paypal thingy, whatever rocks yer boat...
  14. Africa Twin
    I've riden lots of bikes in the past & most have had centre stands, but the one on my RD07A has beaten me! My last bike was a Vstrom & that seemed to have a short piece sticking out at the bottom... apply weight & up it went. But on the AT there is no bit sticking out & no amount of heaving...
  15. Photography
    Hi all, I am thinking of grabbing a Go Pro for movie making, has anyone got a Go Pro and is it any goos for bikes? Ive read so many great an then bad reviews I am so confused!!!! If anyone has links to their footage or just a general review I'd be grateful :D Cheers all !
  16. Africa Twin
    Looking at tire options for my RD04 and while looking at different manufacturers sites got confused by their recommended tire pressures. Honda manual says 2 bar front 2 bar rear and 2.27 bar with passenger Michelin: 2.3 2.3 (and 2.5 for RD07!?, why the difference) Metzeler: 2 bar 2 bar (2.5...
  17. Transalp
    Just gave my forks a rubbdown! Turned out a bit more chrome then I wanted............... :confused: Before and After pic:
  18. Varadero
    Gentlemen, did anyone had any issues with seat lock?? Mine Dero 2008 does not willing to let go seat from the lock… mechanism work as it should, but seat stay in…. I’m confused now , I’ve got service to do and now stuck with it… I will be grateful for any ideas how to deal with it….
1-18 of 152 Results