Honda XRV Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-20 of 47 Results
  1. XR
    Got a xr400 oil cooler off my Dominator flattracker just the oil cooler no connections FOR SALE sensible offers
  2. For Sale / Wanted
    For sale xr 400 oil cooler i great condition pix available this is just the cooler i do not have the oil feed pipes sensible offers
  3. For Sale / Wanted
    Anyone got one lying around...?
  4. Africa Twin
    What do you think ? Is it possible? Recommended? I have seen a few "universal" oil coolers on eBay but can they be fitted to a bike that never had a oil cooler to start with. Then of course the best option might be to fit the oil cooler from the RD04. Anyway what do ye think ? Thanks :)...
  5. For Sale / Wanted
    I have been out of stock of radiator grills for awhile. Now they are back. Introducing a new oil cooler protection grill as well as an exhaust shield to keep you from burning your pants when installing an aftermarket muffler without the original protection. Grills and heat shield are...
  6. Varadero
    How much of the bike did you have to disassemble to mount the 2 parts (one on each side of the bike) shown in the picture here? I took all the plastic of the bike but did not have any room to mount the due to a lot of cables and what I think is the engine cooler (don't know I its correct in...
  7. Dominator / FMX
    This time last year I asked about fitting an oil cooler on my Dommie but got side tracked as I was having clutch and flatside issues and lack of funds to finance an oil cooler. Anyhoo ,the clutch was replaced and now works as it should and my flatside is dialled in now with the help of our...
  8. Africa Twin
    Hi, I recently noticed a coolant leak coming from the inspection hole on the water pump. About a teaspoon of coolant everyday. Discovered the leak after cleaning some engine areas, maybe it was already leaking for some time, not being noticeable because the hole was covered with grease. Any...
  9. Africa Twin
    I am currently drafting auxiliary aluminum fuel tanks for my RD07. On the left side, the mosfet regulator can easily be moved inside the toolbox under the seat. What about the coolant reservoir? Has anyone found a different location? It can't be moved to where the RD03 coolant tank sits because...
  10. Africa Twin
    Today I fitted my new Rugged Roads Engine bars to my 98 RD07A and they look great! Went on very stress free and and very pleased as I fit through my narrow garden gate! I had to remove the plastic lower guard that protects the oil cooler and that lower region below the rads. I realised that I...
  11. Dominator / FMX
    My needle jet arrived from the US of A today so I stripped the carb down and cleaned it. I installed the neeedle and jets but there is a problem. The slide will not close all the way down and I have had it apart but cant seem to suss out whats up. If you look at the following youtube video and...
  12. Bikes For Sale / Wanted
    I've decided to sell my "L" reg. TTR250 Raid. Bought earlier this year with a view to doing some light trail riding, I've realised that I've not got the time nor inclination to actually use it for the purpose intended. It has relatively new Pirelli MT21 tyres and has an oil cooler fitted - a...
  13. For Sale / Wanted
    Hi Folks I am in need of an XR 400 oil cooler assembly or part. Any condition considered Thanks
  14. Africa Twin
    I went to the NEC show today, and had a look at the design exercise that's been talked of as the new AT. I had to peer through the ersatz "mud", but I suspect Honda will need to do a lot of relocation of sensors, or provide a much larger "sumpguard" before the bike could be used off-road in...
  15. Dominator / FMX
    Hi Guys I'm new to the forum. I'm from Cape Town South Africa. I recently purchased a Honda Dominator. This one was a grey import as Honda never brought the Dominator to South Africa. The bike is registered as a 1996 model, but is an RD02. I understand that the RD02 changed to an RD08 in 1995...
  16. Dominator / FMX
    just fitted this jagg oil cooler ,fits really well .Personally I like it hope it will be of some benefit
  17. XRV Swap Shop
    I am looking for oil dispensing plate the part that fits behind the oil filter to feed the oil cooler for a year 2000 motor cheers
  18. For Sale / Wanted
    Sadly a couple weeks ago, an elderly lady decided to cut me off which left me in the hospital with an open frakture and pretty messed up foot. It also left my Twin with some damage, yet thankfully repairable. Now being on strict bed rest, I am searching for parts to get her back on the road...
  19. Africa Twin
    Sadly a couple weeks ago, an elderly lady decided to cut me off which left me in the hospital with an open frakture and pretty messed up foot. It also left my Twin with some damage, yet thankfully repairable. Now being on strict bed rest, I am searching for parts to get her back on the road...
  20. XR
    I have a donor engine in my xr250, its from a jap import, engine number md17e. It doesn't have an oil cooler. It is quite noisy from the top end, valve clearance are all ok, I've checked them as per manual. What else could cause the noise, cam chain? Camshaft bearings? Or are these engines just...
1-20 of 47 Results
Top