cracked

Hi, I am after some wheels for the TA XL650, mine have pitted and cracked in places, if anyone has one for sale?

Does anyone have a surplus standard front wheel (21”) for an RD08 Dommie? Mine has a cracked rim [emoji44] Sent from my iPhone using Tapatalk

Just giving my XR250 a service after finding her again after I sold her 15 years ago. Mortified to find that the rear rim has split! Cracked right through!!:( Has anyone on here got a spare? Or could tell me what else would fit? 1988 rim stamped J18 X 1.85. 587 DOT

Hi Guys, I have an issue with the OE indicators on my 1996 RD07a for the second time since I have owned the bike all the stalks , black rubber parts , have split and cracked off . Does anyone have any alternative types that will fir , preferably not LED ones , any ideas will be most welcome...

This one belongs to my friend. Max weight is 22lbs on that rack (so says the sticker). He had 17lbs of "survial tools and equipement". He went for medium off-roading. Nothing hard. Did a small jump over a ridge and... crack !!! Would you bring less for a day of off-roading ?

Hi Guys need a bit of help, i have an Xl500r 1982 & i have had it for over ten years, but have since got the urge back to ride her again, no i was trying to kick her over after changing the CDI unit & gave her a freshen up with new plug & oil + filter etc etc, now this issue is when i went to...

I definitely want to buy a 650 LM. The only problem is that at around 50,000km, and often even less less, they all suffer from the cracked head syndrome. What are the options? Does Honda sells updated heads? Any other Honda engine will fit in replacement of the 600cc lump? Has a company found...

My Dommie's choke won't stay on, I pull in the lever for cold starts but then it just creeps open again from the vibes before the engine is warmed up. Does anyone know how to tighten it so it only closes when I want it to? The last vehicle I had with a manual choke was a 1971 Mini! The choke...

Second post..... Nightmare!☹️ I have cracked the crankcase cover (rhs) and clutch case cover after hitting a rock. Does any know if the crankcase cove from a CRF250R will fit on the X?? It's a 2005 model. They do look very similar but the Honda part numbers differ somewhat. Cheers Jack

Anyone know whether the different year models/ front wheels are compatible? I have an '09 model with a cracked front rim. I can get a '00 model rim from the Netherlands, but not sure if it'll fit. The Honda model numbers differ, but this is not failsafe as Honda often use different part numbers...

Nothing to do with cold weather! On the back of the headlight surround on the Dommie there are four nuts set into the plastic, into which the instrument / surround screws go. They're like short brass barrels with a threaded hole, and they're machined / knurled on the outside to help them grip...

Gear pedal pivot bolt sheered this morn, on the M60 - which was nice! I changed gear by hand and limped the last couple of miles Anyway, Hunts had one and every bolt on the hanger cracked immediately making removal of the snapped stud a doddle. It literally turned itself out, drilling from...

Looking for some advise on my engine. Jack failed while working on the restoration and back end of bike came crashing down on itself. The shock was out of the bike as well as the swing arm links, so when the jack failed there was nothing to hold the bike's end.... When I was back to work on the...

Forum Members: Greetings from California. I own a white RD04 AT and am looking to purchase a fuel tank and a set of side panels. Please contact me if you have a fuel tank or either side panel available to sell. White would be nice, but isn't necessary. I will consider a fuel tank or side...

Does anyone know the difference between the pre 95 (wet sump) and the 96 on cylinder heads? I have a 95 with a cracked head. I know the barrels are the same and I know the cams are different but what about the rocker covers ? I guess the head would bolt on my barrel but what else would I need...

Hi does any one know what parts I need to do this as I need a crank case anyway as is cracked and leaking oil. any help would be much app.

Had an issue with my Ohlins rear shock ie service, weight related spring fitted & had to have a new crown fitted as the original one had cracked! Many thanks to John at Revs suspension in Halesowen in Birmingham who did an outstanding job. Question is if anyone has the same unit fitted, where...

Stopped at the garage to buy some beer and noticed coolant dripping onto the floor. Got home and took bash plate off and have traced the leak to the underside of the radiator. It seems to be bubbling out of the bottom. I will take the rad off and see if it's either corroded through or whether...

Hello! I'm looking for a new/old radiator for my africa twin, unfortunately i cracked mine in some off-roading action (some goon took us down a lane and it progressed into 1-2ft ruts resulting in a bash and coolant going everywhere :( ) if anyone knows of any going that are in good shape id be...

hi just rebuilt my 125r,rebore piston rings valve guides valves and seals, cracked the top of the exhaust guide when inserting for about 5mm where the stem seal goes, only run engine for 2 miles, and it is smoking abit , should i run her a few more miles or should i have changesd the exhaust...