Honda XRV Forum banner

crankcase

  1. XL
    1976 honda xl 250 breather hose is in a "T" ...comes out of the crankcase,then T,s off hanging down by the swing arm,then the upper part that T,s off goes towards the front of the bike and i cant figure out where it attaches to it dont go on the air box or anything..does it just hang up somewhere??
  2. For Sale / Wanted
    Hi all My XR blew up in Southern Spain, I managed to get it back but I need a new engine really. Would be interested if anyone has a whole one or bits such as barrel, piston, left crankcase. Im in Hampshire but happy to travel or pay postage Pics and story at www.earthwindandtyres.com Ben
  3. Dominator / FMX
    Would anyone know or could recommend the code or paint for the crankcase covers on my 89 nx650 ? I would like to start freshening her up and the cases really let her down :rolleyes:
  4. XR
    Removed my crank as it needs a new con rod , but the crankcase inside has a section that the crank sits in and there is a hole init , will this matter im sure its designed for some reason like to hold oil to lube the crank but with a hole this will reduce it ? . Does anyone have a set of cases...
  5. Dominator / FMX
    Hey NX650 from 1988. Have a jet kit in the mail and planning on doing Dave's mod. I wanted to take the carburetor apart and clean it up before hand, but having trouble getting two of the screws in the float chamber out - seem very soft and I don't want to ruin them. I have PH and PZ...
  6. Dominator / FMX
    Hi guys 1) Does anyone knows torque value for the 4 bolts in clutch plate? https://image.slidesharecdn.com/hondanx-650dominatorservicemanual-121214134812-phpapp01/95/honda-nx-650-dominator-service-manual-112-638.jpg?cb=135549S and torque value for bolt to oil strainer screen(right crankcase)...
  7. XR
    I need to separate my XR400 crankcase. Has anyone used a crankcase separator, and if so, what make was it? I will also then need a Crankshaft puller. Any ideas? I was looking at the Laser 4882: https://www.machinemart.co.uk/p/laser-4882-motorcycle-crank-case-separator/ Cheers Gary
  8. For Sale / Wanted
    I hope this is OK to list here but i have a lot of 1984/85 XL250 USED parts for sale. There are too many to list here but i have many engine parts from complete engines to barrels, heads, crankcase covers, clutch and gearbox parts, electrics, carbs, cables plus many more parts. Let me know if...
  9. CRF - New Forum!
    Second post..... Nightmare!☹️ I have cracked the crankcase cover (rhs) and clutch case cover after hitting a rock. Does any know if the crankcase cove from a CRF250R will fit on the X?? It's a 2005 model. They do look very similar but the Honda part numbers differ somewhat. Cheers Jack
  10. XL Technical Specs
    Hi all - I have a US spec '79 XL500s-Z and I want to eliminate the US crankcase breather/collector, does the UK version have a plain pipe from crank case to air inlet rubber? Has anybody any other solution? thanks!!
  11. Transalp
    Has anyone any suggestions on how to remove the oil seal from the right hand crankcase? It's the seal part 11 on here: Genuine Honda Parts | Honda Cars | Honda Motorcycles | Honda Power Products | Lings Honda Motorcycle Parts selection | Honda Bike XL700VA9 | RIGHT CRANKCASE COVER Cheers Karl
  12. Africa Twin
    Hi Guys Have just bought a RD07 1994 with 8000 on the clock. Brilliant bike, cant belive I never heard how good they are. Only thing and im sure this is just a bit of bike hypocondria. Crankcase on clutch side gets really hot. Ok so it sits really close to exaust so not suprising really...
  13. XR
    Hi all Can any body help! I've just managed to get hold of a xr250r engine and its missing the 2 tophat bushes that go into the crankcase to support the swing arm bolt. Anybody help me with these please. Thanks Simon
  14. Dominator / FMX
    Hi is the kick start on an xl 600 the same as on an early nx650 dominator, are the internal fittings compatible with the dommie I have a spare xl600 crankcase cover I was wandering could it be an easy fit?
  15. Africa Twin
    Did some servicing on my AT today (changed the fork fluid, which looked quite good for almost 50000 miles), and I noticed the end of the breather pipe from the crank case was plugged. I yanked the plug out, and out came a bunch of water mixed with a little bit of oil sludge which smelled...
  16. Varadero
    Hi, I have an 05 Varadero which I have only recently bought and it has an extended length gear lever. The original was cut and a piece welded in. I have been having trouble changing gear and noticed that the lever fouls the crankcase (alternator cover?). How soft is the metal on the lever...
  17. XR
    So, Honda XR400RY, just checking that I am not dreaming reference an oil change. I need to remove the clutch cable, brake lever, oil pipes and strip off the right hand side engine casing to access the crankcase screen down the bottom as part of an oil change? Really? Do I do this every oil...
  18. Mechanical Advice
    I have no spark at all on my 89 , 600cc ta. I have checked and appear to have 1 faulty cdi, power goes in via the 2 pin but doesn't transfer out again. I have traced 4 wires coming out of the cdi, being 2 go to the coils and 2 go to a block connector leading to the right Side crankcase which I...
  19. For Sale / Wanted
    I have a cracked crankcase on my 1993 XR600R.... :( Has anyone out there got either a full engine, part engine or crankcase pair I could lay my hands on? Thanks in advance :thumbup:, Louis.
  20. Dominator / FMX
    LEFT CRANKCASE COVER - DOMINATOR 650 NX NX650P 1993 FRANCE - NX650P - Sale Honda motorcycle spare parts microfiche origin I have been looking for the clip that holds the engine sprocket in place . I usually look on the French link 9above) however I cannot seem to find a listing Have you got one...
Top