Hi ive bought a 97 XR400R but upon inspection its got a broken valve which in turn has damaged the head too much for repair so im looking for a head preferably with valves/cam etc im in UK? Thanks in advance.

Hi All Has anybody got a heat shield for AT RD 07, the lower one that fits between the down pipes and the tail pipe, mines a bit battered and not happy with it, paint finish not an issue but must be quite straight and undamaged. Thanks Luke

hi Has anyone got a clue how the the little connector to release the indicator wire is released i cant separate then to replace a damaged left hand indicator any help out there Neil

I have recently purchased a XR250 project - Frame number HMME03-5700255 & Engine number ME08E-2314517 I'm trying to identify the year and model ? The cylinder head is off with a bent exhaust valve, and damaged guide. What might have caused this to happen :eek:

Lads, Looking to replace heavily damaged AT sidestand. Even the stand itself will do. Thanks in advance, Aidan.

Hi Guys, Quick question, will the sidestand for a Transalp XL 650V RD10 fit the same as the stand on a Africa Twin RD07? I ask this because I'm finding it hard to find a replacement for my heavily damaged sidestand on my AT. I have found one for a Transalp XL 650V RD10 and figured you guys...

I have damaged the left hand fork slider (bottom at the thread where the spindle screws in). I can get second hand ones from ebay but they are from the single disk model. Now, the single disk model has the disk on the l/h/s, good, I obviously need the mounts for the calliper, but are they the...

Hello! I'm hoping someone can be my saviour... I'm in need of a replacement left front calliper for an RD07. After a somewhat long and stressful fiasco removing the calliper pin, the thread in the calliper is partially damaged. The pin tightens up but I don't trust how strong the thread is...

Looks like a failed reg/rec on my 1994 RD07 has damaged the ECU :( so looking out for a replacement. Anyone know of one available (even just to test to confirm mine has actually failed)? Are there any recommendations for an after-market unit? Thanks.

heya, so my RD04 took a tumble and the screen was very badly damaged - the break stretches acriss about 75% of the screen. What are my options here? Glue it and, if so, which glue! (plastic weld is probably the correct term). Replacement? Does €75 sound about right to you?

AT right hand side fork leg slider (outer tube) Number 17 in the pic. Mine is damaged inside from a worn bushing so if you have something please send PM with details

Hi everyone Hopefully someone can help. I have just bought a 2001 650v with a damaged fairing The bike is blue, is it the same colour through the years or did it change ? Are all the farings the same or are their differences It might just be easier to replace the panels rarther than repair...

Hi thinking of upgrading my headlights and side lights. Has anybody done this...led or zenon dont want to damaged the bike by fitting them.. Any ideas...:blob7:

Hi. Just got my AT '94 and it is missing center/main stand. Let me know if you have one sitting in a corner and you are willing to give it another chance to get on a road for a reasonable price. It can be lightly damaged or in bad visual condition. I am from Latvia, but have shipping adress in...

Hi guys, looking for AT rd04 upper cowl top fairing can be bit damaged as its for a project. Thanks Val

Bike is a 1993 rd07, and my doubt is if there is any difference between the Right Rotor and Left rotor, besides the "R" and the "L" mark in each rotor/disc brake? Looking at them (visual inspection) they look exactly the same with the exeption of an L and R marking on the side. Why am i asking...

Guys.... A friend of mine took a pair of damaged hand guards I had and did these for me to match a custom seat I made.... Do you guys like them?

I am on the look out for the next rebuilt project, need to put some of this new found knowledge to use;). Preferably RD07A. Cosmetic damage, accident damaged, right off, engine problems anything considered. If anyone hears about anything languishing unloved that needs saving from the breakers...

ok here goes im after uprating my back shocker on my 96 africa twin.its not .broke or damaged in anyway just wonderd if a new shock was worth considering to improve ride for road and when loaded.any advice excepted and if any one interestead iv just had a call from nitro {giles) 556 all in with...

If you have a set, even repainted or slightly damaged, please let me know. I need one to messure and redraw for a reproduction project. TIA Lee Like those