Honda XRV Forum banner
decomp
1-11 of 11 Results
  1. XR Technical Specs
    Hi all,I have a xlr250 baja md22. '92. As far as I know, it's quite close to xr250r, so I asking here.I don't like the auto decomp., so cable cutted. The bike stored for a year. With the usual (to me at least ;) start procedure, I push slowly the kick starter, find a compression, release and...
  2. XR
    Hi all, I recently rescued an XR400 from an ISO where is has been rotting away for the last 10 years. I have given it an almost complete overhaul, including taking the carb off and giving it what I thought was a good clean. It is really hard to get started, and only seems to work when I hold...
  3. Dominator / FMX
    Ok guys, i know i'm getting a bit annoying, but it's my first bike and i want to learn how to maintenance it. :D How do you set the infamous (auto decomp.) right side exhaust valve before you go adjusting the tolerance on it? What is the proper procedure to do this? Its a 1998. NX 650 W...
  4. Bikes For Sale / Wanted
    Honda XR400 Rally Raid for sale due to my dicky kick leg. Ready for that Paddy or Taffy Dakar. Excellent condition. 7350Km's Runs sweetly. (recently adjusted tappets and oil and filter done regularly in my low mileage time (3 times). Nice bark, quiet engine. Frame powdercoated black. New head...
  5. Dominator / FMX
    Trying to get some ideas for the best place to put a washer type cht sensor. I thought about bolting it to the hole where the spindle for the unused decomp lever normally goes or maybe the little threaded hole above it. Any one else using one and where did you attach it Could you also submerge...
  6. XR
    Hi, can anybody explain how auto decomp works on XR600R '92 in details? Is oil pressure involved in it's work? Can be faulty decomp the reason of not starting engine? How soft should be decompressor cam spring? It feels really soft. If all mechanism looks quite ok, no excessive wearing visible...
  7. XR
    I never use the decomp on my 2003 xr400 so I plan to remove it. Question is can I just take out cable and lever etc and just leave the mechanism on the cylinder head or do I need to remove that ask Also? Cheers
  8. Dominator / FMX
    Hi guys Ive had to replace my cam shaft and rockers , as the guy before me ran it low on oil and the cam and rockers were well warn, Ive removed the cam and had a new cam , fitted decomp lifter and one way clutch , had the sprocket holder pressed back on . my question is if i rotate the crank...
  9. XR
    Hi All I have put a CRF clutch/hot sart perch on my xr 400 to tidy it up from the seperate clutch and decomp lever, it all went on with out to much hassle, but I would say the decomp cable is a fraction short, it is all work ok but I would like it a little longer, does anyone know if the 250...
  10. Dominator / FMX
    Right then, I'm back ont the road on Tuesday after my 6 month ban and have been fettling with the bike. Sorted out my jetting, re-worked my wiring(XR600 only has about 10 wires- bliss!) and checked and adjusted my valves. Start up the bike, now 2 or 3 kicks not 20(!) and it ticks over...
  11. Dominator / FMX
    Hello, i got this rattle noise in the engine. Think i am gonna change the decompressor stuff on the cam, but what chould i change? Anyone got part number?
1-11 of 11 Results
Top