Honda XRV Forum banner

difficult

  1. Wanted: Garmin zumo 660 cradle harness and bits to attach to bars

    For Sale / Wanted
    As it says in the title, have two bikes, one fully kitted with satnav zumo 660, would like to use it on my AT. Anybody got the parts I need, for sale. Getting difficult to find them in the shops Thanks UK address or Irl address for Irl seller:nike:
  2. Hmmm

    Africa Twin
    Long time since I posted on here, but I've just found a rare treat in need of some love:p I say rare because bikes of any size are anyway extremely difficult to find here in Myanmar, but an AT is an even more stunning find:thumbright: This one is up for sale for around 1800 US$ so I'm sooo...
  3. VTR tank on a Varadero?

    Varadero
    As the title suggests, I am toying with the idea of altering my Varadero by fitting a different petrol tank from a VTR, has anyone done this or used a tank from a different bike? If so how difficult and what was required? All replies welcome:thumbup:
  4. Africa twin 750 dirt ride.

    Riding
    This is my every weekend ride. Most of the time it is easy.... But I has some really difficult spots. https://youtu.be/92LWB9IbWhA Sent from my MI 5 using Tapatalk
  5. Handlebar height

    Dominator / FMX
    Does anyone have a solution to the handlebar height on the RDo2 ? I find mine very low and difficult to use especially when standing on the pegs, i have loosened them and pushed them up a little which is slightly better but causes the engine to race slightly on full lock so not ideal. I like the...
  6. 84 XR 350 engine removal.

    XR
    Hello everyone, I'm having a difficult time removing my 350's engine. I've followed the manual and have removed everything and I've even removed all the engine mounts. However, when I try to remove the lower left engine bolt it doesn't have enough room to come out before it hits the frame...
  7. Transalp 650 clutch cable change

    Transalp
    Hey all, My clutch cable snapped last week (luckily once I was home and parked) and I just swapped it out the other day. It took me longer than expected to free the old cable, purely because there was a little cable clip on the rear of the main upright. Difficult to see or feel, but once I had...
  8. Hi and 'help' please

    XR
    Hi, last summer I bought a 2002 Honda xr 440 with electric start. Had total oil loss and engine completely ruined. 1. Can anyone advise if fitting the electric start to replacement engine would be difficult [for my mechanic] 2. any thoughts on using Honda trx quad engine as replacement 3...
  9. Lowering seat hieght

    Transalp
    I know that parts are difficult but I am seeking advice on lowering the seat height on my 2004 trans alp 650 anyone have or know where there might by suspension lowering kits or low seat. What is the thoughts on softening the preload on the rear shock and lowering the forks a bit I have a...
  10. 1974 xl350 spec questions

    XL
    Hi everyone, just picked up a new bike and I am beginning the tear down process. I am having a difficult time finding a good free version of the service manual. Sorry I am cheap but need the cash to get bike running thank you for the help
  11. Anyone done an RD07a Engine Rebuild?

    Africa Twin
    Hi Lads Did anyone here rebuild their engine? I'm currently rebuilding my XR650R engine, and was considering doing the same to my AT when I'm done, but I'm not sure how difficult it is on a twin compared to a single? If anyone has done it, do you have a parts list I can check? I'm thinking all...
  12. XR125 L7 arrow exhaust systems

    XR
    Good evening all I am finding it difficult to find a replacement Arrow exhaust system for the XR 125 L7. Is there a difference between the 2004-2006 version,this being the closest year I can find? Is this an improvement over the stock system? Cheers:thumbup:
  13. Wanted: Africa Twin in Canada

    Bikes For Sale / Wanted
    Hi there, I'm looking for a XRV750 somewhere in Canada. If anyone knows of one for sale please contact me. Importing is costly and difficult but do-able. I'm located in Vancouver BC but willing to travel or ship from other provinces thanks
  14. Valve check

    Varadero
    I'm wondering how difficult it is to check the valves on a 2008 Varadero xl1000. Since it is a 90*, does it make it any easier to gain access? Any tips/tricks?
  15. Neilsen brake piston removal tool set

    Transalp
    Anybody got or used one of these kits or similar? I'm having trouble pulling the piston out using the kit, surely it cant be that difficult as they dont seem to want to move, when I use the metal bobbin to level against the caliper body with the cone shaped bit inside the socket inside the...
  16. Autocom Helmet Installation

    Chatter
    Hi, I just got a autocom pro 7 set up and set it up in a Shoei helmet the speakers make it really difficult for my ears to not fold over and the call quality is not great. Any ideas? if i can't resolve the comfort part its back on fleby with it. cheers
  17. New Front Disks Removal

    Transalp
    Hi All, Has anyone had any experience in removing the front disks? Mine have been on since new 2011, XL700VA, and am very concerned that I will get the Disks and start the job to find I strip the threads or ring the bolt in some way. How difficult would I find the job? Should I bight the...
  18. Tripmaster Replacement

    Accessories
    Simply put the trip master on my 2002 RD07A is dead. It has been worked on a couple of times amd many capacitors changed but its now dead. RIP. As you can imagine its difficult to calculate my fuel consumption during an adventure ride. Could you guys please advice on what would be the best...
  19. 94 XL 250

    XL
    Hi, I'm looking for a manual for my 94 xl 250 degree. It's quite difficult to find. I have found a clymer the covers a range of models but I feel it might not quite cover mine. Can anyone offer any advise as to where and what manual to get? Thanks
  20. xl250s an domi

    XL
    hi Guys,, im finding it difficult to get a hold of a 23" front fur ma xl250s... will a domi 21" front wheel fit straight on there. or would i nedd to change the hub. as ones a disc an the other a drum ???
Top