I've started to get a rapid rattling/buzz coming from the insider the clutch cover on start-up. It goes away after about 10 seconds. I took off the clutch cover expecting a loose tab washer on the clutch - but that's fine. I notice that the oil pump driven gear can be rattled a bit, though...
HI had a problem with my nx650 carb on my 93 rdo2
Bike starts and idles fine but anything above 1/3 throttle the bike judders and doesn't accelerate further!
Not starved of fuel, carbs been cleaned 3 times and still the same problem.
Cant put my finger on it and dont want to spend odd couple...
A quick question: are there any differences in the back-cover (most importantly in mounting points) of the speedoblock depending on the generation, i.e. are they identical and/or swappable? Happened to break the mounting ears on mine of a 1995 RD08 while carelessly tackling a motocross...
This is my rear wheel broken. I can't tell for sure if it broke before or just after I bought the bike.
I can't find any other used FMX wheel anywhere on the internet. I found some front wheels but not rear. Oddly front is 36 and rear is 32 spokes. Wtf is this and why? :mad::mad:
I have bought an FMX.
Currently I have more important problems solve with it, but in future I would like to at least upgrade exhaust + carb jet + air filter.
I have done exhaust manual rework for my suzuki gs500 in past. I just cut off old can and welded new straight can onto it. Also...
I'm a new member from France (in Auvergne, in the center of the country)
First of all, I want to apologize for my poor english (kind of a french tradition, I think...)
I ride a 1988 gold honda dominator, I keep it as a "collector".
I also love VW bugs (I own a 1303 super beetle), and old...
New owner saying hi - fuelling help
I picked up my first 1999 nx650 Dominator this weekend after many years of sports bikes and wanting a change to something with a bit more comfort and adventure in mind. It's not my first thumper as I owned a XT600 after passing my test but being so...
Does anyone out there have any experience of fitting a Keihin FCR41 Flat Slide Carb to a Dominator? I was told by a carb specialist that this would be an improvement and a little more power.
If so, how hard is it and what would I have to do .?
Thanks in advance
I have rebuilt my dominator and some how now its all back together have lost the VALVE SET, STARTER Part # 16046-MY6-770
and cant find one for sale that not mad money anywhere, any help or if anyone has one it would be very much appreciated . cheers Ewen .
i have rebuilt my dominator and some how now its all back together have lost the choke slide plunger and cant find one for sale anywhere any help or if anyone has one it would be very much appreciated . cheers Ewen .
I'm hoping to build a special dominator motor with a high compression piston - say 10.5:1
No problem I thought, as Wiseco do them for the XR650L - which is the same as the Dominator right?
Does anyone know 100% for sure if this is true of all XR650L motors because the Wiseco catalogue does not...
Hello Honda Dominator riders!
I've been looking which options there are for a rally type fairing for an RD08 Dominator model. Has anyone managed to fit a Boano fairing with an acerbis tank to a RD08 model?
so yesterday I rode the Dominator to work for the first time since the bike has been in bits and put back together. I'm not sure the vacuum pipes etc are correctly configured and wondered if anyone can help.
All photos are pre strip down and they themselves may or may not show the...
My XRV650 RD03 needs its wheels replaced. It seems it was stored outside on grass for about 17 years.
I have managed to get a Transalp 21" front in good condition and a ST1000 Pan European front left hand brake disk.
Would a Dominator rear wheel fit?
Good Dominator rear wheels are cheaper and...
I'm hopeful to get the old Dominator back on the road this month, however a friend advised there are new MOT rules regarding the exhuast noise. His CBR300 recently failed a test with a modified exhaust.
Now my Dominator has a single exhaust and its loud, not as loud as some bikes but I'm...