Honda XRV Forum banner
downpipes
1-18 of 22 Results
  1. XL
    Searching for new downpipes for my 79 XL250S and so far found one supplier David silver, are there any other makers of exhausts for these? or what have other people done when they rust through? Thanks for any help.
  2. Transalp
    Hi, Please would somebody give me an advice on changing the exhaust downpipes? I'm always worried I may shear off the lugs that screw into the cylinder heads when I'm undoing the domed nuts holding the flanges. Also, is there a work around to not having the gasket between the downpipe and the...
  3. Bikes For Sale / Wanted
    Hi, I am looking for a standard exhaust / cat for a xl700. I have got the silencer so just looking for the cat and downpipes. Thanks
  4. Dominator / FMX
    My rd02 needs some, downpipes not a problem sourced them What twin exhaust have people fitted off the shelf or with slight fabricating ? 88 rd02 Sent from my iPhone using Tapatalk
  5. Africa Twin
    Had the exhaust off to replace the clutch some time ago & now the bottom two gaskets are blowing. It has a Remus end can on so the question is will the downpipes be oem or are they different to fit the end can? Had an oem exhaust replacement gasket with the clutch kit which was way too big..
  6. XL
    hi guys am looking fur nice downpipes fur ma 78 250s, or any links to a some..also 23 inch tyre needed, there was some guy on here who found a manufacturer,,i cant remember who it was ,if anyone has any info pleaae mail me,,,cheers
  7. XL
    hi i am an interloper from the Dommie site Been having real difficulty sourcing end cans for my Dommie (greenlaner for the summer) have bought a xl600 downpipes that seem to fit quite ok Does anyone know of a breakers in there area who has an xl600 silencer end can or maybe has one hanging...
  8. Transalp
    Just spotted this on fleebay. If Motad are dropping their 600 Transalp downpipes it might be worth acting fast: Transalp 600 Honda downpipes and collector stainless steel from Motad | eBay
  9. Transalp
    Having looked at a schematic of the exhaust system on my 98 600, I was expecting to see a clamp with two bolts which I could loosen and then separate the two parts so I could slide on a shiny new end can. However, as you can see this is not the case. Am I missing something?
  10. Dominator / FMX
    I've got 2 sets which only show very light surface corrosion. Anyone know whether they are stainless as standard? thanks Bill
  11. For Sale / Wanted
    taken off my NX at 8K miles as I bought a new system . Cleaned and sprayed with 2 coats of heat resistant paint then stored. Generally VGC . plenty of photos here 2002 NX650 exhausts - a set on Flickr. £100 posted or collect from exeter. thanks Bill
  12. Africa Twin
    Hi all, After my last post and all your helpful comments, I will be buying RR bars for my 'twin.... But.... I would like to know your thoughts on changing the original downpipes to after market ones to match up my Leovince can. Is it worth it? What have you got, how does is sound and is it...
  13. eBay - Transalp
    Honda Transalp Downpipes XL600V 1991 good condition | eBay
  14. Dominator / FMX
    will the downpipes from a xl600r fit straight on a nx650 barrell?
  15. Africa Twin
    Hi, My downpipes on my old rd03 have just about bit the dust, the collector is pretty ruined covered in various holes etc. Does anyone know where i can get a replacement, not from mr Honda?
  16. For Sale / Wanted
    For Sale - a set of downpipes and collector for RD04, RD07, RD07A. The rear one does not have a heat shield fitted but both the bolt holes are fine with sound threads. £50 plus postage to UK
  17. Dominator / FMX
    Washed the slr this afternoon decided to start it up and make sure the engine was properly dried out before putting it back under wraps again, left it running stationery outside shed, it was getting dark, came back 10 minutes later and someone had started painting the downpipes cherry red
  18. Transalp
    Hi All, Anyone know if the downpipes from a 96 model TA will fit an 87 model. Looked at part numbers and appears that the rear pipe has a different number.
1-18 of 22 Results
Top