Ive got a 96 RD07 in black ... has anybody got any idea how much it would be worth as its havin the frame dipped blasted and powder coated ... new gold rims hubs blasted and again powder coated gold with S/S spokes and nipples front 320mm disc and pads new disc and pads at the back .. ... engine...
This is a long shot but I figured I would give it a shot. I have a 1996 transalp in the blue/navy colour combo.
I have badly damaged my front cowl and offside front side panel.
Would anyone happen to have any fairings in this colour combo that they can sell?
If not I will have to suck...
So after 31,500 miles the headlight bulb dip filament gave up on my 650 the first thing that's ever gone wrong with the bike :D I found out when I switched on the ignition thirty five miles away from home in the pitch black :( and so the beam adjuster came in really handy as it let me lower the...
Would anyone (preferably in the UK) have a straight headlamp/fairing sub frame they may be interested in selling? (Picture attached.)
Don't mind if it's rusty and in need of painting as long as it's not bent.
If so, please send me a message with how much you'd like for it posted to Surrey...
I really love the looks of the AT, but to me the rear light and plastic protector don't do the bike justice. So I relocated the rear light to sit flush with the fairing and removed the plastic protector (I know, not practical, but hey, stripe of dirt on the back adds to my image...)
Anyone know where I can get a set of bolts and screws for my fairing?
'87 Transalp 600 with original fairing?
I have found this one online, but not sure it will fit my early bike?
Project VaraTurnipStorm or FireTurnipDero.
Now I know I’m still working on the Tracker project, but after thinking of this name I just had to start a thread before someone else does & pinches the title. Ha.
The idea has come around after reading up about various Harley XR750 flat track based...
Ok so I've just got an 88 TA and will be sripping and restoring it over the next couple of months. What i am wondering is, is it possible to change the TA headlight mounting frame, headlight and top fairing and fit the AT headlight frame headlights and top fairing without too much trauma? Love...
TA 650 (probably applies to all models though)
For anyone thinking of doing this..on the 650 its a bit of a job.
The Haynes manual says you just "attach the lower end of the new cable to the upper end of the old cable, and just pull the cable through", yeah, right.
What it fails to mention...
Hello Honda Dominator riders!
I've been looking which options there are for a rally type fairing for an RD08 Dominator model. Has anyone managed to fit a Boano fairing with an acerbis tank to a RD08 model?
A mouse some how got into the left side fairing area and chewed up the entire CDI rubber mounting bracket and a few wires...beyond use now. I am trying to source this rubber bracket. Honda refers to it as -
CUSHION CDI UNIT
Product number: 30401MY1631
Item no: 1 shown in the...
Any interest in this before she is put to bed for the winter?
Loosing interest in riding the same roads and looking after the bikes so they new homes.(See add flor KLR 650)
I would sat the bike is in very good condition. At some time she has been down on offside I think very light --brake...
My AT's on it's third headlight fairing (or 'nose cowling' as the parts book calls it). The first two developed bad cracks around the holes into which the side fairing panels connect. I've kept the old fairings with an eye to trying to repair them and have now, after many years, got a plastic...
I hope you're all keeping well!
Clearly I have too much time on my hands and too many ideas floating around in my head as my RD04 is undergoing further surgery... As a result, I am going to be selling my Boano fairing and headlight kit.
From memory, these are £600+ new, so hopefully...
mt AT (Catweasel's) has barkbusters and they limit the steering. They hit the fairing before end of the normal range of movement and I think they are why my steering lock won't engage. Any tips before I start grinding bits away?
I have been running mine, testing etc, with out any fairing or sump guard and I like it
Bike still gets amazingly hot and I can feel more heat on my legs than before
I am hoping that's due to more airflow wafting around the engine
I am thinking a simple nose cone cowl only would be ample for...
I’ve seen these a few times over the years (mostly Riky Cross) and I’m considering hunting one down.
Any opinions or suggestions as to problems etc, availability or even if anyone has one knocking around?
I know there was a chrome one on fleabay a few months ago so I reckon the chances...