I have just bought a 05 xr125l it does however need a new carb. I have found carbs that will fit and work but none seem to have the heater like the stock one fitted. If I got a
standard carb with no heater will it run ok or so I need one with the carb heater.
thank you :)
just doing the valves on my 99 xr400 and in the gasket kit are 4 o rings but when i took the valve stem caps of there is no o ring in the maunual there is a pic of the o rings but cant find any on mine anyone help
There seem to be quite a few very inexpensive Mitsubishi style fuel pumps all over the internet of late.
I’m assuming they are Chinese
Has anyone tried one yet?? if so please post your thoughts as to fit and function.
In the box of parts that came with the '89 NX650 that I just bought, I found the metal plate/sticker that shows the VIN, tire pressure info, model year, etc. Where does this thing belong on the bike? I want to glue it back on, but I can't find it on parts diagrams.
I am from Sydney Australia,
And own a 1982 Suzuki Katana 7/11.
Noticed you have fork extensions.
Am trying to fit 07 Bandit 1250 forks to my spare Kat and maybe those fork extensions might be a fit.
Can you tell me what size they are and the thread pitch as well. My forks are 43mm...
I was wondering if anyone had any advice on who to go to for parts? Who is the best / best value / most helpful supplier?
I also need a new battery and was wondering if I should go for a direct replacement or find a more modern sealed battery?
Has anybody got a heat shield for AT RD 07, the lower one that fits between the down pipes and the tail pipe, mines a bit battered and not happy with it, paint finish not an issue but must be quite straight and undamaged.
Hi everybody, I am rebuilding front brakes and I need to change two out of four pistons, but I have trouble finding them in online shops where I usually get my stuff (german and austrian shops).
Some have it for older models, some say that it is the same piston for older and newer models (I...
I have been lucky enough to be the new owner of an 96 XRV750. As we all know there are not many here in the US and I'm excited to get her on the road. I'm working on rebuilding the motor and I can not find info on what grit of hone to use to re-ring. I have factory rings and the bores...
How much, all in would a set of USD forks cost, inc wheel, disc caliper etc off a KTM640 supermoto/enduro and everything I need to fit it to my bike (RD04) and what could I get for my original forks, etc? Basically swap out the whole front end - labour aside - wopuld I break even?
I have a red 1999 XL600V Transalp with a damaged headlamp cowl.
I have found a replacement cowl online which is red but I'm not sure the colour will match.
Does anyone know if there were different shades of red used on this model/year?
I've attached a picture of my bike.
It's quite an...
I did a quick search in the forum but didn't find anything similar to my issue.
My 2nd gear rattles quite a lot when I open the throttle throughout all the rev range. The rattle occurs only in 2nd gear and only during aceleration. I'm sure it comes from the gearbox and it's not something...
I have these two. Free to collect from North London, or £10 posted
they fit a 650 Transalp, and maybe a 600/700 too? (i'm not sure)
- standard 48 tooth rear sprocket
- 47 tooth rear sprocket (lowers the revs a little for motorway riding)
both only lightly used
as per these...
I've seen multiple people on this forum fit an AT sumpguard on their 650 Transalp's. But how? :o I don't think the mounting points line up. The AT one has 2 in the front instead of the TA's 1... I found a user named Tramp talking about a recent post he made where he explained it but i can't seem...
Hi All, I bought a new battery for my 07 Transalp and found it was a charging issue and didn't need to fit it.
It was bought online in May and i didn't get round to sending it back...
Its still sealed in the box, genuine Yuasa YTZ12S looking for £40 would need to be collected ideally