Search Results for ‘filters’

Has anyone fitted UNI filters? I picked up one off ebay which fits straight onto the carb anyone know if it will work?

Has anyone had any experience with pod filters such as those that can be used on the Honda Hawk https://www.hordpower.com/index.php?main_page=product_info&cPath=1_40&products_id=148&zenid=t9gtpas51iqqntkum9bdb167i5 My airbox has seen better days I think the snokel pipes have shrunk / degraded...

Wondering just how well the Dominator handles offroad? And if anyone uses one as a greenlaning bike? Picked up a old beaten up bike that I am in the slow process of converting into a scrambler, but one that will actually cope with a bit of mud and green lanes. So just wondering how well they...

Hi Can anyone feedback on the quality of the air filter advertised on eBay around the £20 -£25 mark? Are they any good? Thanks JJ

Hey guys, my name is Marcel and I'm from the Netherlands. I recently bought an '88 rd03 and I'm slowly taking it apart/fixing things/putting it back together. I just did a carb revision (with some help from a friend), cleaned the tank with lemon juice... bought some new tyres, new oil, filters...

I have a Hiflo (quality aftermarket) airfilter. Unused, in original packaging £18 posted* Genuine Honda airfilter, new in original packaging £22 posted* Fit all 650 Transalps. * Postage free unless you are privileged enough to live in the arse end of nowhere/expensive to post to then...

Did anyone try to use an air filter skin on RD03/04 air filters? By seraching on the forum I haven't found anything. Example:

I have a few brand new airfilters to fit a 650 Transalp. Genuine Honda item in original (opened for pic) packaging £23 posted A couple of quality HiFlo items, again brand new £17 posted (not all are boxed) I can knock a couple of quid off if you want more than one or will add a couple of...

As you may know I've replaced the original silencers on my 2000 NX650 with the end cans off a Triumph Street Triple (see original post). Now the winter nights are here I'd like to 'up' the main jet a bit as per comments on other people's posts about changing exhausts & air filters. So, I've...

Got the service kit this morning so set about the bike ready to get it done. Took the right fairing off only to find this.... Carp.....now need to buy a new set as the other side is very badly rusted and barley makes a connection. Then noticed the rubbers mounts for the fairings are all kaput...

As part of the stripdown the airbox came off and so I naturally had to clean it up. So I have questions about it. Is the airbox better than individual filters ? Would there be a downside to binning the airbox? Resonators? What purpose? I'm thinking its a lot of trouble to go to making such a...

Hi, I am aware that pod filters usually are banned on forums :), but I am currently rebuilding the bike and would like to clear up the area under the seat for design reasons. Anyone have any experience of removing the airbox and add two pod filters directly connected to the stock carbs on a...

Had my Vara for 5ish weeks, done an oil change as standard soon after pickup... But what should be my next steps? I'm thinking filters, fluids and plugs. But add carb balancing, valves etc... My reason for asking is that I don't mind tackling some jobs, but some are beyond me and I'd rather...

Hi all, My best mate is selling his 2001 XR 650 prepared for the Dakar race by P. Sireyjol (Fun Bike 43). The bike comes fully serviced and "ready to race", with all original Honda spares + a lot of additional service spares (clutch, levers, filters, etc...). It is registered in France and...

Hi all, My best mate is selling his 2001 XR 650 prepared for the Dakar race by P. Sireyjol (Fun Bike 43). The bike comes fully serviced and "ready to race", with all original Honda spares + a lot of additional service spares (clutch, levers, filters, etc...). It is registered in France and...

Hi! First post is a cry for help\advice......I have a 1996 xl600v that I can buy for a ok price, but the bike looks really bad. It has been roling 68000km and have had a few standing still tipping over accidents. It has been all over the world and it shows. :( The engine cranks over and starts...

anyone know if its possible to fit KN filters directly to the carbs ( is there enough room) ? And will it effekt the way the motor run ? I would love to get rid of all those plastic boxes and rubber hoses. TIA Karsten

My bike is no longer standard and I want to update it further. I want to fit K&N style pod filters to the carbs so i can utilise the space currently in use by the standard air system. Anyone fitted them before? Size?

50mm fitment brand new never used £15 posted

Hi everyone, The Dominator project continues apace - so far new oils, filters, pads, gaiters etc. Now that I have had a chance to take it for a run I am aware that the bike is hesitant at mid/high revs - it feels as if the petrol is running out although the petrol is fine and it is possible to...