I bought a XR650R (thicker) 15T front sprocket, then I found out that on my FMX front sprocket is 14T. Which is original? 14T or 15T?
BTW I found on the INTERNET that people are fitting XR650R front sprocket on XR650L to prevent it from cutting into sprocket splines. Please note that XR650L and...
hey guys, just bought my Conti TKC80 yesterday. I will fit them on Honda FMX650 supermoto. They are 40/60 road/offroad. I chose them, because I want to take my FMX to the gravelroads, fields, etc, but I live in city, and also need to drive on asphalt. Also only those tyres had 120 and 150 widths...
This is my rear wheel broken. I can't tell for sure if it broke before or just after I bought the bike.
I can't find any other used FMX wheel anywhere on the internet. I found some front wheels but not rear. Oddly front is 36 and rear is 32 spokes. Wtf is this and why? :mad::mad:
I have bought an FMX.
Currently I have more important problems solve with it, but in future I would like to at least upgrade exhaust + carb jet + air filter.
I have done exhaust manual rework for my suzuki gs500 in past. I just cut off old can and welded new straight can onto it. Also...
I guess this is my first post here. I hope to post more.
I have bought an FMX 650 2006.
There are no stickers on it, except one on front fender, and one on right gas tank side, but they are not original.
I was wondering, is there any electronic version of stickers, whether they are...
I’m pretty sure all the above use the same basic frame, so the dimensions i’m after should be the same.
Could someone with a Swing-Arm from one of these measure the front pivot width. That would be the outer width, i.e. the width required in the frame and also the inside width, i.e. the width...
Help needed please!!!... ;-)
I've spent 5 years off and on trying to get an old 1996 Dommie working that I got off eBay.
I soon realised that the original engine was fried, low compression, sludge oil, so replaced it with a 2005 FMX engine.
Removed and blanked off the emission system.
Hi to all,
I am currently facing an issue with my FMX. While it does not smoke not at all (at least not visibly) when it warms up (very hot) it starts to smokes (mainly from the right exhaust). This however does not happen every time that the motor warms up, so the occurrence is irregular. I...
Hi to all,
I would like to ask what the recommended valve clearances for FMX 650 are. My net research gave me two outcomes: (1) 0.10 (intake) and 0.12 (exhaust) +-0.02 (like in XR650L, Dominator etc) , and (2) 0.10 +-0.02 for both intake and exhaust valves (see here...
Thought I’d post a couple of pictures of progress so far.
I picked up a tatty FMX in March 18 and since the have been slowly rebuilding it in the style of a tracker / Scrambler hybrid.
Still lots of tidying to do but the basics are now done and I like the direction it’s going.
It’s all my...
Good evening all, I'm having problems wondering whether the fmx sparkplug should be a short plug as each time I renew the plug it never seems to go in all the way, I clean threads and put plug in until I feel it stop hard and I can see the crush washer still isn't home, it's been like this since...
Currently building a street tracker from my old FMX.
Just re assembling it and yesterday had all the idiot and horn working. Come back to it today and have lost the horn and neutral light ?
Can’t find any duff wiring etc and visually checked the fuses.
Any suggestions ?
I’m building a scrambler / flat tracker from my FMX 650.
My standard carb has two sets of electrical connections on it. What are these electrical connections for, what do they do???
I have a Keihen FCR flatslide carb to go on the bike when I’m finished the build but this carb doesn’t...
Can anyone point me in the right direction to find a replacement set of swing arm bearings to the Honda FMX. Genuine Honda one seem to be discontinued and are very very expensive. Are there any pattern
parts out there ?