Honda XRV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 500 Results
  1. Africa Twin
    Hi all, I have recently became a happy member of the 1990 750 club, on starting to repair and tidy her up I have found that I am in great need is a rear cushion assembly as it has almost disinterested. Please can you advise if you have or know who would have one I could buy. Thanks in advance
  2. Member Classifieds
    Hi - does anyone have SW motech pannier frames they no longer require - for the trax - Givi Kapper the quickly detachable type thanks - Pat
  3. Africa Twin
    Hello all, I am in the middle of converting my US-spec Transalp to an Africa Twin RD03. The frame and most parts carry over to both models. I am using all original Africa Twin parts when possible and upgrade parts elsewhere. All parts are being powder coated or refurbished. In the end...
  4. XR
    Hi all ive just bought a Honda XR400 believe to be a 1997 i have the frame and engine numbers but how do i get the reg number and V5? Help please?
  5. Africa Twin
    Ive got a 96 RD07 in black ... has anybody got any idea how much it would be worth as its havin the frame dipped blasted and powder coated ... new gold rims hubs blasted and again powder coated gold with S/S spokes and nipples front 320mm disc and pads new disc and pads at the back .. ... engine...
  6. Transalp
    Started to change the output shaft on my 700 XL. All the bolts holding the chrome heat shields and the painted heat shields were sized in so that took me around 4 hours to do, I’m a slow worker, drill out re-tap the holes and order new bolts. The rest went as I expected it to no real drama...
  7. Bikes For Sale / Wanted
    SOLD Okay, it's a tough decision as I love my Transalp and she's NEVER let me down but I want an Africa Twin and as I can't afford two bikes then she has to go! So for sale is my trusty Honda Transalp. This has been my trusty commuter to work and has NEVER let me down. The only time I've had...
  8. Member Classifieds
    Hi , I'm looking for a straight front sub-frame as mine got bent in a fall. It's like the one in the picture. Would you have one in straight condition? If so, please PM me. Cheers Pete
  9. Transalp
    Hi, Would anyone (preferably in the UK) have a straight headlamp/fairing sub frame they may be interested in selling? (Picture attached.) Don't mind if it's rusty and in need of painting as long as it's not bent. If so, please send me a message with how much you'd like for it posted to Surrey...
  10. Africa Twin
    Hello Everyone. Greetings from Denmark. New to the Forum and to the Africa Twin. Had the idea (I know it's blasphemy) to convert an XRV 750 1992 to electric motor run by batteries and solar power, to prove that EV is possible with a heavy robust Enduro machine. Bought a nice RD04 in Poland...
  11. Africa Twin
    OK, so I got home the other day, put bike away as normal, no problems, but next day...nothing. No lights, nada, dead. Getting in there with my multimeter, I diagnosed a knackered ignition barrel, swapped it for a new one from David Silver and the bike started first time, roared into life. Great...
  12. Dominator / FMX
    I’m pretty sure all the above use the same basic frame, so the dimensions i’m after should be the same. Could someone with a Swing-Arm from one of these measure the front pivot width. That would be the outer width, i.e. the width required in the frame and also the inside width, i.e. the width...
  13. Transalp
    Greetings, I'm hoping someone can shed some light on a little bump in the road I've come across in my build. As the title states I've thrown a NT650 / Bros 650 / Hawk 650 motor in a Transalp frame and my issue is the front cylinder's exhaust port isn't allowing me to get the Hawk's front header...
  14. Transalp
    Hello folks, I had an intermittent fault with my 700 for months now. Sometimes it would't start and then sometimes engine would cut out when handlebars were turned to the right. Yesterday I decided to have a proper look and after looking for frayed wires or something out of ordinary I pulled on...
  15. XR
    hi, i managed to leave my side stand spring in a forest in devon :/ a genuine honda spring i found for 4euros but with 18euro postage !! so im opting for a universal spring, the only thing is i dont know what length to go for. between the pin on the stand and pin on frame is about 170mm but...
  16. Bikes For Sale / Wanted
    Hi there As mentioned a few months ago in the XR segment of this forum, I am offering up first dibs on my XR400 to you guys. As I now have osteo arthritis in my right foot, kickstarting has lost its appeal somewhat, mostly as it sometimes hurts, anyway. It is a 1996, P reg. Mileage unknown...
  17. Dominator / FMX
    For those that like that kind of thing, the current issue of Bike magazine has a feature on a French-made custom from a Dommie donor bike. July 2019 edition, page 20. The engine, bash plate and front half of the frame look familiar, but that’s about all! Sent from my iPhone using Tapatalk
  18. Africa Twin
    Greeting from Austria! Since i saw many Twins with rear tanks in this forum, i got to ask you a few questions. Short story: I bought a modified RD07 1995 last year which needed some love, stripped it this winter, removed everything the previous owner built, checked and overhauled pretty much...
  19. Africa Twin
    Hi, Thanks for the add. I have just started stripping this barn find RD04. The frame is now at the powdercoaters and I am now busy cleaning and sourcing parts! :)
1-19 of 500 Results
Top