just doing the valves on my 99 xr400 and in the gasket kit are 4 o rings but when i took the valve stem caps of there is no o ring in the maunual there is a pic of the o rings but cant find any on mine anyone help
hi i have an XR400 standard bike, i live in portugal and parts are hard to get, i am looking for piston ring set and top half gasket set with valve seals any idea where to get them in uk thanks kevin.:cool:
I need to remove my exhaust to fit the centerstand and so bought these
but after reading haynes manual and lookiing at other sites...
Hi I'm probably in the wrong section but I'm rebuilding a 2000 XR400 and i need a generator gasket and a clutch cover gasket any ideas where i can get these anyone please? i live in Tamworth in the Midlands UK cheers.
Hello there! I was rebuilding my carbs while looking at the Honda fiches, and saw that a gasket on my carb is positioned differently. On the fiches, the order is: 28-1-15, so the metal collar (15) sits on the carb, the gasket (1) sits on the metal collar, and the plastic plate (28) sits on the...
Please would somebody give me an advice on changing the exhaust downpipes?
I'm always worried I may shear off the lugs that screw into the cylinder heads when I'm undoing the domed nuts holding the flanges.
Also, is there a work around to not having the gasket between the downpipe and the...
Fixed my carb float needle with a new one, now looks like I need a carb bowl gasket as thats leaking:rolleyes::rolleyes:
Anybody point me in the right direction, Dave Silvers or Wemoto dont seem to have any listed?
Thanks in advance
Hi, I´m Sergio, from Spain, I´ve got an ´97 Rd08 Domi,bought last year with 50000 km. Now, it´s dissasembled to change the starting clutch.I¨ll make an tutorial with photos about the job, now I´m waiting the piece and relative cover´s gasket.
My question is about painting the alternator cover...
Here is the video of my noisy RD07. I changed camshaft tensioner becouse of this noisy sound, double check valve clearance, check exhaust gasket.
Is this normal sound. Firend of mine said that probably its crankshaft bearings or something with valves....?
I need you opinions before i...
Is this a known issue with the AT? Noticed a puddle on my garage floor, been dreading finding out the cause but it just seems to be the rubber gasket.
From what I can see it looks fine though and I'm confused as to why a fairly durable looking gasket could just fail suddenly.
Best pic I...
Hi, I'm new to the forum but have been looking through the old threads to get a feel for the Varadero from owners points of view.
I'm going to test drive a 2004 Varadero today and may buy. Apart from the exhaust gasket problem are there any other Varadero specific issues I should look for...
Mine's gone again after 13 months...Has anyone got a recent contact for anyone who makes/stocks the phosphor bronze replacement jobbies please?
I really don't want to be doing the job annually(assuming I don't trade it in for a new AT or something else that tickles my fancy:p)
I have had some problems with popping on the overrun on my rd04-90. I was going to change the header gaskets but is confused about the sizing of the front gasket.
On 91 up it is supposed to have the larger one in front. I have bought both to try and the larger one fits very nice in...
Has anyone tried these gaskets out yet , if so what was the verdict.
They look as though they will last longer than those silly graphite jokes.
Just got a decat pipe 2nd hand but the guy didn't send the gasket sleeves for fitting into the headers,
The original Honda ones are only about 3mm thick washer type where as the pics of the Leo Vincent ones are more like a tube so anyone know where I can get some?
1989 TA 600
I have an oil leak from this bit (see yellow arrow). Does anyone know how easy it is to replace that gasket? Can it be done with just the tank off? Or would the whole engine need to come out?
How much would you guys pay for a 1990 XR250, 12k on the clock, runs but in need of a cylinder base gasket. Plastics a bit beaten up but otherwise ok. 6 months mot
My thoughts are around the £700 mark?