Honda XRV Forum banner
gearchange
1-6 of 6 Results
  1. Transalp
    As the title, when I'm driving with a dipped headlamp sometimes this will switch to mainbeam when I change gear. This will only last for a second and reverts back to dipped once the gearchange is completed. It does not happen with every gearchange and can occur in any gear moving up or down the...
  2. Transalp
    I've been kind to my Transalp,and changed the oil (same as previous change .. Hein Gericke 10-40 semi-synth).I've also oiled the clutch cable and adjusted it to about 5mm freeplay at the handlebar lever. Since the oil change, though, I've found it increasingly difficult to find neutral when at a...
  3. Dominator / FMX
    Hi all, i'm new to this forum and to Domi's, but here is my question if anybody can help. I have a 95 Dominator with about 20,000 miles on her. When going down the gearbox selecting 2nd or 1st gear can be difficult and clunky at lower speeds and getting in to neutral requires a blip of the...
  4. Transalp
    Hi ive got a 650 alp with a problem :) how can i explain it ,,, well when i pull up at a junction in first and have the clutch half pulled in say, semi coasting ,or in traffic or at lights etc there is a clunking noise from the box or clutch as if the gear is not engaged propely , it only...
  5. Dominator / FMX
    What it says really - about an inch or so of free play on the lever, despite me Dremel-ing the clamp to give it an extra squeeze. Any solutions? My current list includes: (a) Weld the bugger (b) Araldite the bugger (c) Drill through & add a self tapper (d) Strip the whole damn thing and get...
  6. Transalp
    Gear selection and gear changing between 1st and 2nd and 2nd and 3rd on my 650 is always a bit on the clunky side. Dealer gave me the old 'they all do that, sir' routine, and said that the first service oil change should quieten it down, as would time. It hasn't. Engine oil level is correct...
1-6 of 6 Results
Top