Honda XRV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 500 Results
  1. XR
    hello from Italy, I need to know if the store XR650R.Co.Uk is still active today. Someone here in Italy has tell me that XR650R.Co.Uk is gone out of business, is this true? Hope smeone can help me to understand how is the thing! THANKS!
  2. XR
    I have just bought a 05 xr125l it does however need a new carb. I have found carbs that will fit and work but none seem to have the heater like the stock one fitted. If I got a standard carb with no heater will it run ok or so I need one with the carb heater. thank you :)
  3. Varadero
    I bought one of the last Varas in 2014, made in 2011 I believe. I’ve done three long European rides (3K to 4K miles) and it’s been brilliant. It’s now done nearly 41K miles and in preparation for another long ride around Europe I’m thinking I should change the rear shock. Just looking at Haynes...
  4. Transalp
    Hi All, I have been looking at the requirements for ULEZ bikes, and I cannot work out if my 600 will pass or not? I called Honda and they cannot give me a CoC for the bike (too old). Has anyone had the emissions (I think it is only the NoX output that they care about?!) tested? Am I able to get...
  5. Transalp
    Thinking of spoiling the old machine and replacing the 21year old rear shock. The YSS units that Wemoto sell seem to get great reports when fitted to the little CRF250L, so I was thinking of trying one out. Anyone on here tried one on a 600 Alp? I have prices up a Wilbers for it as well -...
  6. Dominator / FMX
    My indicators pack up when it rains. The lights come on but don’t flash. Same whether left or right is selected. All bulbs working ok. I’m no electrician and wouldn’t know how to use a meter to trace a fault. But given that all four bulbs work, the problem occurs on both sides and the switch...
  7. Dominator / FMX
    In the box of parts that came with the '89 NX650 that I just bought, I found the metal plate/sticker that shows the VIN, tire pressure info, model year, etc. Where does this thing belong on the bike? I want to glue it back on, but I can't find it on parts diagrams.
  8. Africa Twin
    Hi everyone, I am a proud owner of a AT RD07A 1997 (Name TOTO) I experienced a bizarre moment this morning as was riding, Toto decided to cut out leaving me with no lights or ignition button working( dead ) 10 minutes later after waiting on the side of the road she started again ! Now I will...
  9. XR
    Being a vertically challenged 5’7 90kg with 30” inside leg I might need to lower my (new to me)Xr400r a tad! ive bought a second hand seat and will be sending it off to get the foam shaved down a bit and a new seat cover but think it might not be enough! Was considering a lowering link but it...
  10. Member Classifieds
    A set of Givi (I think!) crash bars that fit all 600 Transalps (according to EBay sellers) They are used and have scratches and a small dent (filled) They have been given a coat of black paint to preserve them. They were removed from a 1992 TA (pictured) as I am making a naked TA. To be...
  11. Africa Twin
    Anyone know how to get hold of a touch up for an RD07? Is there a paint code that can be used? Cheers
  12. Africa Twin
    Hi All Has anybody got a heat shield for AT RD 07, the lower one that fits between the down pipes and the tail pipe, mines a bit battered and not happy with it, paint finish not an issue but must be quite straight and undamaged. Thanks Luke
  13. Africa Twin
    Hi everybody, I am rebuilding front brakes and I need to change two out of four pistons, but I have trouble finding them in online shops where I usually get my stuff (german and austrian shops). Some have it for older models, some say that it is the same piston for older and newer models (I...
  14. Transalp
    New member question - Hello recently bought a 2008 transalp 650 which I am enjoying riding much more than the GS1100 I just got rid of (too heavy !) Anyway, wonder if someone can help identify the pannier rack that my bike has fitted from the attached photo. The bike did not come with panniers...
  15. Africa Twin
    I would like to replace my coolant hoses on my RD03. Honda parts are NLA. I was reviewing threads about the Samco or other aftermarket hoses and found threads that stated that some hoses were incorrectly sized. Those hose kits are pretty dear. Can't see paying that much for parts that are...
  16. Africa Twin
    Has anyone here replaced their steering head bearings? If so...how did you remove the bearing 'race' that is on the lower yoke? This thing... The internet suggests - using a chisel - using an angle grinder - using a dremel - using two screwdrivers - using some sort of special tool so...how...
  17. Transalp
    Has anyone here replaced their steering head bearings? If so...how did you remove the bearing 'race' that is on the lower yoke? This thing... The internet suggests - using a chisel - using an angle grinder - using a dremel - using two screwdrivers - using some sort of special tool so...how...
  18. Transalp
    Hello all, My tranny just died while out in spain, the con rod snapped appaently! I have my eye on a 1996 PD06 engine to replace the old one. I hear that the 1996 engines had a "new whole electronic (TCI) ignition system (new ignition unit, new impulse ignition coils, new ignition advance...
  19. Helmets
    I'm currently wearing a Shoei Neotec Mk1. The visor leaks a fair bit when it rains. The Pinlock insert seems to shrink and fit poorly, therefore it mists up. The leaking visor causes the misting to accelerate. I contacted Pinlock and they sent me a new insert. It also shrunk over time and now...
1-19 of 500 Results
Top