AKRONT WHEEL: (very good condition, Fresh Truing done)
- AKRONT 18'' 3.0, 32 holes rear Heavy Duty Rim: USED (good condition, signs of ware, no rust) with Heavy duty spokes (v. good condition)
- Originat AT Hub: USED (v. good condition, signs of ware)
- 5XJerk Damper (almost new)
- Original AT...
I have a XRV RD04 1991.
Reading all service manuals and visiting all websites in the world, don't clarify which needle jet holder goes where. One have 6 holes - one have 10 holes.
My logic tells me, that the one with 10 holes is in carburettor 1, since its jetted a little larger than...
Bought my first transalp 2 weeks ago, one small problem
The tail light bulb, works running but no brake light, pulled the bulb out filament seems ok, but, I want to buy a spare bulb to see if the bulb is the issue befoer changing brake switches, here is the real problem, the bulb is an odd one...
Went to the Netley and Beaulieu jumbles this weekend and came back with this-
A Honda 1965 C200 Touring (90cc ohv), able to bring it home inside the car!
Looks as though a previous owner had some tins of desert camouflage paint- a Suez crisis dispatch rider bike?
Seems mostly there or in the...
I have an rd7a (2003) and im in the process of a carb overhaul. Can't get the friggen needle out of the needle holder (black slide block that's attached to the diaphragm)
The heinz manual say insert a 4mm screw, and then just pull. The screw goes in happy, but the needle holder seems...
Purchased in error!
Brand new Shindengen FH012AA MOSFET Reg/Rec
In line splash proof maxi-fuse holder & 30A fuse
10AWG black/red cables to go to battery
12AWG yellow cables to go to alternator
And all crimps to suit (or use your own connectors or soldered joints as you wish)
I am fitting a phone holder to my Dommie (1996 RD08). When I came to wire it in I found the pictured wire and connector under the seat above the battery. It has the same type of plug as my phone charger and would be an ideal plug in point if it is a switched connector. It is hard wired...
Does anyone here have any recommendations for a decent map holder to fit the TA700 tank?
I used a magnetic tank bag on my old bike but the plastic tank covers has ruined that. Tried a tank ring tank bag but the fuel cap is too far forward on the TA for this to work with anything of a decent...
I'm looking to rewire/route the electrics too this block as its a known trouble spot.
Does the main battery feed also supply the spade connectors in this block in some way? I thought I saw a thread related too this subject on here at some point.
Lecy stuff is not my bag and need a idiots guide...
How do I get my side light out of the headlight of a 700?
I don't mean to pull it out but it fell out of its holder into the headlight assembly!
Any easy suggetsions welcome.
small bit of surface rust,
I touched up the paint with some Hammerite Smooth Silver but the paint is mostly original.
The helmet holder works but the key is optional as I will need to get one cut (cost €18)
89 Africa Twin RD03
Any good german speakers.. german members, austrian members, swiss members... how do I search for a Headlight Cowl Holder in German ebay (the subframe that holds the headlight assembly) ?? There are about a million xrv 750 parts so would like to filter if possible :)
Many thanks in...
If anyone is breaking a bike or has a spare I could really do with one. as mine is unstraightenable and the poor bike is a bit bong eyed and will probably only be allowed a day time mot, when the time comes. Its the mini subframe that attaches to the main frame and holds the headlight and the...
I have a batch of manual Roadbooks arriving at the end of the month. I will be putting them on eBay but will offer preferential rates on here should anyone want one.
They are the same as the Acerbis ones but just not branded. These are for sale by others at up to £89 on the Internet.
It would appear one of my CDI units has failed I've managed to get it working for now with the use of many zip ties :p but I don't think it will be long before it packs in again. I also seem to be missing the holder and they were just floating around under the seat wrapped in...
Does anyone know if the holder for the parking light bulb is common on other models too?
looking at buying one from a bike breaker maybe, the new part 33140-MAT-611 is costing me over 40 euros delivered,seems a lot of cash so I was wondering if one from another Honda model would fit,thanks.