Honda XRV Forum banner

holding

  1. Dominator / FMX
    Losing the will to live trying to find a relevant manual or wiring diagram for an RD08, problem I have is the neutral light comes on when holding the clutch in and goes out when released, and when using gearbox, neutral light comes on when changing gear up or down when dipping the clutch...
  2. Transalp
    I’m a strong believer in less is more when it comes to touring speed, a rider can withstand more hours at 65mph for example than 75, especially if they stop every hour for 10 mins rest. I’m riding 250 miles on Friday but in no particular hurry, so thought it might be fun to try a programme of...
  3. Transalp
    Hi, Please would somebody give me an advice on changing the exhaust downpipes? I'm always worried I may shear off the lugs that screw into the cylinder heads when I'm undoing the domed nuts holding the flanges. Also, is there a work around to not having the gasket between the downpipe and the...
  4. Africa Twin
    Hi i have two part numbers which i cant conclusivley identify ? both should be for the front cowl / fairing . 90111-mm9-000 and 90156-se3-003 What i need is to replace the perished rubber bungs which combine the nut internally i think its a 5mm nut(could be wrong) I have 12 screws holding the...
  5. Africa Twin
    I have been trying for two weeks or more to remove the clutch basket, I have tried everything I can think of and nothing is working, I bought a clutch holding tool today and still no luck. Of course I don’t have a impact gun and I’m using basic tools. Also the engine is out of the frame. Has...
  6. Transalp
    Does anyone know if there is supposed to be a washer or spacer between to fork and the speedo drive assembly? I know there is one on the opposite side. But for some reason, when I do up the shaft on the wheel. The bolts holding the disk are rubbing on the caliper on the speedo drive side. Its...
  7. Charity Events
    Hampshire motocross club are holding their Leukemia Busters Motocross event at the famous Matterley Basin in Winchester tomorrow (26th July) Adults - a fiver Kids under 14 - free All in a good cause as far as I'm concerned Scott Redding is gonna be there too apparently
  8. Africa Twin
    I am trying to remove the front sprocket cover and have undone the two bolts but can't get the cover off. I have looked at the Haynes manual and can't see anything else that could be holding it on. Am I missing something? Looks like something near the bottom stopping it from coming off.
  9. Dominator / FMX
    Hi, I have had the carb cleaned(by JRS). Once the bike has been started and warm and i am riding down the road ,it feels like it is holding back .If I open the throttle it improves a bit, if I put the choke on that helps also. Do you think the needle height is wrong? Wayne
  10. Meet Ups / Rideouts
    Craig ( Largewayround ) Is holding a soiree at Strontian shortly, go to ADVSCOTLAND, join up and have a hooleee :D Here is some of the views you will see Across Loch Linnhe The Corran ferry, my saviour on a Friday afternoon :D The view from my compound I'm sure Craig wouldn't...
  11. Varadero
    Just wanted to check something. I wanted to fit a fender extender to my 2011 Varadero. Now on my old 2002 Varadero taking the front mudguard off is simple. However after removing 6 bolts holding the mudguard on, 4 mudguard bracket bolts and 3 bolts that hold the brake piping against the...
  12. Transalp
    Looks like the welder has fooked my 600 front cylinder head :pain10: Welded round a broken exhaust stud he said he was going to remove. Now there is no way it is coming out. Anyone got a spare front holding open a door or some thing. Just had an idea maybe I could cut out the good section...
  13. Chatter
    Pictures sent with PCN from local council. My daughter has a parking permit (on the dash under the PCN) and never bought a ticket because she doesn't need one! Is that finger holding a ticket on the OUTSIDE of the screen? I know it's not that clear but can anyone see any sign of that ticket...
  14. Dominator / FMX
    where can i buy one of these the ebc one i have seen is only available in the states unless you know differnt?
  15. Meet Ups / Rideouts
    Adventure Bike Rider is holding a small local rally in Bedfordshire on the weekend of the 26th April. I will be leading a off road rideout for a few on the Saturday. Anyone interested? I'll be on the GSA hopefully.
  16. Chatter
    Tragic loss of life but really is there any place for holding races on open roads? BBC News - Cyclist Junior Heffernan killed in Severn Bridge race crash
  17. Africa Twin
    Hi guys. Heard nothing but good things about Heavy Duties and they are one of the few places that make pannier racks for the RD04. Anyone here got a set and how are they holding up? Are they symmetrical or is the exhaust side further away from the bike? I have an OCD about things being...
  18. Dominator / FMX
    the problem being it will not come off :angry5:,no mater how big or hard the hammer. is this a common problem with these bike already had to cut the bolt holding the linkage to the rear shock surely i'm not going to have to cut the swing arm off ,,,,,,,,,,,,,,,,,,,,:(
  19. Varadero
    Just getting around to putting a Givi pannier rack on my old XL1000V2. Instructions say to use the original Varadero rack bolts to secure the rack. The original bolts holding down the front of the Varadero rack seem a little short when the rack is added. I was planning on replacing the original...
  20. Chatter
    If anyone is interested Aylesford Priory Nr Maidstone is holding a Classic Bike show Sunday 5th August. Allways get lots of bikes there, plus Auto jumble and other stands. :thumbup: If any of the Southeast guys are going we could meet up ? Nigel.
Top