Honda XRV Forum banner
1-8 of 8 Results
  1. Product Reviews
    I thought I'd share my experience of this product. We were in southern Chile back in December last year when I noticed some liquid had collected on the left side of the engine - it appeared to be coming from the rear of the front cylinder's head gasket and was running down the block and onto...
  2. Transalp
    Hi all, Needing you advice please - I have taken the end can off the Alp ( joins about 5 inchs after the before footpeg) as it was blowing from the join. Ordered an part from local dealer to seal it all up. Part is a graphite type ring that slips nicely over the original bit but as the Fuel end...
  3. Varadero
    My radiators have a good build up of limescale which i would like to remove thinking of using this Halfords | Holts Radflush 2-Step (2x250ml) or this Halfords | Bars Flush Cooling System Cleaner anyone used these? are they safe to use on a motorbike?!
  4. Wheels, Tyres & Tubes
    Cancel Tyre weld HELP Never mind this request, AA say Tyre Weld no good, waiting for recovery. Need answer now please. Even though it says tubeless, has anyone tried Holts Tyre Weld in a tubed tyre? will I get 30 miles. Cheers John
  5. Transalp
    Being used to tubeless tyres, only having tubes in mountain bikes. What happens if I get a puncture? Can I use those tyreweld type sprays that you can get (and I have used to get me hope safely in the past), its much easier to squirt in some foam rather than take off brakes and wheels and repair...
  6. Chatter
    I bought a tin of this stuff (the Holts one) took it home and only then looked at the label. It says Tyreweld is "suitable for tubeless tyres only" (my italics). Have I picked up the wrong one, what's the difference if the tyre's tubeless or not - it's only a latex solution how would it know...
  7. Africa Twin
    Howdy all, This has probably been asked a squillion times but here we go again. I'm fairly confident I can sort a puncture in the front coz I can get the tyre off, but I spent an hour the other evening hopping up and down on the back and I couldn't budge it off the wheel. I mean I couldn't...
  8. Chatter
    Changing tubes isnt that hard, although a ball ache! Had to do a front recently when the valve became seperated from the tube! Must have been a manufacturing fault. To top that, I then got a puncture in the front again, so as no spare tube, I had to use my tin of Holts Tyre Weld. Even with a...
1-8 of 8 Results